-
1by Jamal, Parveen, Jaswir, Irwandi, Hashim, Nurhasri Mulyadi, Azmi, Saiful Mohammad Nizam“…The effect of homogenization in breaking protein-carotenoid complexes from cassava leaves…”
Published 2011
Get full text
Get full text
-
2“… that 95-99 percent of maximum aggregate consumption (depending on the region…”
Get full text
Get full text
-
3by Nisham Asmeer, Roslan“… condition for the elongation at the break point reached the maximum value of 68% when the PEG is 22.07…”
Published 2013
Get full text
Get full text
Get full text
-
4by Jamaldin, Mohd Nazree“… then tested using universal testing machine (Instron 5569) for its tensile strength, elongation at break…”
Published 2018
Get full text
Get full text
-
5by Sheikh Osman, Sheikh Muhammad Shauqi Kamal“… for Tensile at Break and Maximum Load (5.851). Based on this result, all dowel size has highly significant…”
Published 2016
Get full text
Get full text
-
6“… was performed at 70C, for maximum duration of 1000 hours to examine the thermooxidative degradation of HDPE…”
Get full text
Get full text
Get full text
-
7by Maryudi, M.“… at 70°C for maximum duration of 1000 hours to examine the degradation of pure HDPE and HDPE containing…”
Published 2012
Get full text
Get full text
Get full text
-
8by Zainal, Muhammad Haikal, Hassan, Oskar Hasdinor, Ab Samad, Liana Shakira, Ali, Ab Malik Marwan, Yahya, Muhd Zu Azhan“… digestion. Therefore, pre-treatment is required to break the algae cell wall. There are several types…”
Published 2016
Get full text
Get full text
-
9by Syuhada, N.I., N.M., Huang, S., Vijay Kumar, H.N., Lim, Rahman, S.A., G.S., Thien, Ibrahim, N.A., Ahmad, M., P., Moradihamedani“… experienced maximum tensile stress by 51 and 71% compared with CS. Moreover, the elongation at break for both…”
Published 2014
Get full text
Get full text
Get full text
-
10“… spot size with an aims to eliminate graphite phase and achieve minimum surface roughness and maximum…”
Get full text
Get full text
Get full text
Get full text
-
11by Norayuni, Azizi“… of the elongation at break of the sample is the maximum with 106 % for the sample with 96 % of PU/4 % of B30…”
Published 2016
Get full text
Get full text
Get full text
Get full text
-
12by Delvi, Hamza Afser, Faheem, Mohammed, Khan, Sher Afghan, Kumar M., Kiran, Kareem Ullah, Mohammad“… break efficiency of ethanol-gasoline blends was found to be increased compared to gasoline. Maximum BTE…”
Published 2019
Get full text
Get full text
Get full text
Get full text
-
13“… at break, maximum load bearing capacity,impact resistance and hardness were evaluated. It was observed…”
Get full text
Get full text
Get full text
Get full text
Get full text
-
14“… to natural weathering for the maximum duration of 24 weeks. Assessments on the change of the properties…”
Get full text
Get full text
Get full text
-
15by Tan, Kok Zhuan“… at break at 2.2%, tensile modulus at 368.18MPa, decomposite rate of 2.88% and SEM test shows many voids…”
Published 2017
Get full text
Get full text
Get full text
-
16by Mohd Fahmi, Jasni“… are presently available. Hence, lots of research has been made by the scientists and engineers to break…”
Published 2012
Get full text
Get full text
Get full text
-
17by Martin, Hii Chun Yeong“…, elongation at break at 3.508%, decomposite rate of 1.413% and SEM test shows many gaps yet with maximum used…”
Published 2017
Get full text
Get full text
Get full text
-
18“… with increasing the concentration of Mn ions as well as radiation doses. In contrast, elongation at break…”
Get full text
Get full text
Get full text
Get full text
-
19by Mohd Iqbal, Mohd Zolkepeli“… on the drill pipe can cause it to break (called twist-off). This problem results in drilling delays. Twist-offs…”
Published 2008
Get full text
Get full text
Get full text
Get full text
-
20by Suhaimi, Suraya Ahmad“… and stopped automatically when the maximum puncture load achieved. The results showed that diagonal, vertical…”
Published 2015
Get full text
Get full text