Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15

In the present study, the effect of Zirconium (Zr) loading (1-7wt %) as promoter on the properties of Ni/SBA-15 catalyst for production of syngas by CO2 reforming of CH4 were studied. Zirconium promoted Ni/SBA-15 catalyst was prepared using one pot sol-gel method as described in the literature [1]....

Full description

Bibliographic Details
Main Authors: N., Abdullah, Harrydass, Ellapan, Nurul Aini, Razali, Herma Dina, Setiabudi
Format: Conference or Workshop Item
Language:English
Published: 2019
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/25409/
http://umpir.ump.edu.my/id/eprint/25409/1/27.1%20Syngas%20production%20via%20co2%20reforming%20of%20ch4%20over%20Zr%20Ni%20SBA%2015.pdf
id ump-25409
recordtype eprints
spelling ump-254092019-11-13T01:11:24Z http://umpir.ump.edu.my/id/eprint/25409/ Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15 N., Abdullah Harrydass, Ellapan Nurul Aini, Razali Herma Dina, Setiabudi TP Chemical technology In the present study, the effect of Zirconium (Zr) loading (1-7wt %) as promoter on the properties of Ni/SBA-15 catalyst for production of syngas by CO2 reforming of CH4 were studied. Zirconium promoted Ni/SBA-15 catalyst was prepared using one pot sol-gel method as described in the literature [1]. The physiochemical properties of Zr-Ni/SBA-15 catalysts were characterized using XRD, BET and FTIR meanwhile the catalytic performances of the of the catalyst was carried out in a stainless steel fixed bed reactor at 800°C, atmospheric pressure and CO2/CH4 feed ratio of 1/1. The ordered mesoporous structure of SBA-15 was proven by N2 adsorption desorption isotherms. The surface area and pore volume of catalyst were decreased with the increase of Zr loading as ZrO2 particles were occupied in SBA-15 frameworks and thus destroyed SBA-15 structured [2]. ZrO2 peak of 1Zr-Ni/SBA-15 was not detected in XRD result (Fig. 1) indicates to well dispersion of the Zr species on the SBA-15 surfaces [3]. The catalytic activity test revealed that the optimum Zr loading was at 1 wt% with CH4 conversion, CO2 conversion and H2/CO ratio were 87.07%, 74.01%, and 0.42, respectively as illustrated in Fig. 2. This was due to the well dispersion of Zr that promote the Nickel (Ni) species to confine in the SBA-15 pores as proven by XRD and FTIR analysis. All catalysts showed a good stability up 900oC with less than 5 % weight loss as analyzed by TGA. The addition of 1wt % of Zr enhance the Ni dispersion which create a proper active site for CH4 and CO2 accessibility and also reduce carbon formation. 2019 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/25409/1/27.1%20Syngas%20production%20via%20co2%20reforming%20of%20ch4%20over%20Zr%20Ni%20SBA%2015.pdf N., Abdullah and Harrydass, Ellapan and Nurul Aini, Razali and Herma Dina, Setiabudi (2019) Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15. In: Energy Security And Chemical Engineering Congress 2019, 17 - 19 Julai 2019 , Pulau pinang. pp. 1-2.. (Unpublished)
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TP Chemical technology
spellingShingle TP Chemical technology
N., Abdullah
Harrydass, Ellapan
Nurul Aini, Razali
Herma Dina, Setiabudi
Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15
description In the present study, the effect of Zirconium (Zr) loading (1-7wt %) as promoter on the properties of Ni/SBA-15 catalyst for production of syngas by CO2 reforming of CH4 were studied. Zirconium promoted Ni/SBA-15 catalyst was prepared using one pot sol-gel method as described in the literature [1]. The physiochemical properties of Zr-Ni/SBA-15 catalysts were characterized using XRD, BET and FTIR meanwhile the catalytic performances of the of the catalyst was carried out in a stainless steel fixed bed reactor at 800°C, atmospheric pressure and CO2/CH4 feed ratio of 1/1. The ordered mesoporous structure of SBA-15 was proven by N2 adsorption desorption isotherms. The surface area and pore volume of catalyst were decreased with the increase of Zr loading as ZrO2 particles were occupied in SBA-15 frameworks and thus destroyed SBA-15 structured [2]. ZrO2 peak of 1Zr-Ni/SBA-15 was not detected in XRD result (Fig. 1) indicates to well dispersion of the Zr species on the SBA-15 surfaces [3]. The catalytic activity test revealed that the optimum Zr loading was at 1 wt% with CH4 conversion, CO2 conversion and H2/CO ratio were 87.07%, 74.01%, and 0.42, respectively as illustrated in Fig. 2. This was due to the well dispersion of Zr that promote the Nickel (Ni) species to confine in the SBA-15 pores as proven by XRD and FTIR analysis. All catalysts showed a good stability up 900oC with less than 5 % weight loss as analyzed by TGA. The addition of 1wt % of Zr enhance the Ni dispersion which create a proper active site for CH4 and CO2 accessibility and also reduce carbon formation.
format Conference or Workshop Item
author N., Abdullah
Harrydass, Ellapan
Nurul Aini, Razali
Herma Dina, Setiabudi
author_facet N., Abdullah
Harrydass, Ellapan
Nurul Aini, Razali
Herma Dina, Setiabudi
author_sort N., Abdullah
title Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15
title_short Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15
title_full Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15
title_fullStr Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15
title_full_unstemmed Syngas production via CO2 reforming of CH4 over Zr-Ni/SBA-15
title_sort syngas production via co2 reforming of ch4 over zr-ni/sba-15
publishDate 2019
url http://umpir.ump.edu.my/id/eprint/25409/
http://umpir.ump.edu.my/id/eprint/25409/1/27.1%20Syngas%20production%20via%20co2%20reforming%20of%20ch4%20over%20Zr%20Ni%20SBA%2015.pdf
first_indexed 2023-09-18T22:39:00Z
last_indexed 2023-09-18T22:39:00Z
_version_ 1777416787766280192