Determination of heavy metals concentration in dry anchovies / Zaidatul Norakmar Mohd Ridah
This study aimed to determine the concentration of essential heavy metals (zinc, copper) and non-essential heavy metals (cadmium, lead) in four different types of dried anchovies that were obtained from retail shops. All samples were classified as Type A (big, peel), Type B (big, unpeel), Type C...
Main Author: | |
---|---|
Format: | Student Project |
Language: | English |
Published: |
Faculty of Applied Sciences
2017
|
Subjects: | |
Online Access: | http://ir.uitm.edu.my/id/eprint/23942/ http://ir.uitm.edu.my/id/eprint/23942/1/PPb_ZAIDATUL%20NORAKMAR%20MOHD%20RIDAH%20AS%20C%2017_5.PDF |
Summary: | This study aimed to determine the concentration of essential heavy metals (zinc,
copper) and non-essential heavy metals (cadmium, lead) in four different types of
dried anchovies that were obtained from retail shops. All samples were classified
as Type A (big, peel), Type B (big, unpeel), Type C (small, unpeel), and Type D
(small, peel). Heavy metals were analysed using Flame Atomic Absorption
Spectrophotometer (FAAS). Concentration of zinc was the highest in all samples
which is 0.93 mg/kg. Lead shows the lowest concentration which is below the
detection limit of FAAS. Meanwhile, concentration of copper and cadmium were
0.047 mg/kg and 0.043 mg/kg, respectively. All of heavy metals in samples were
below the permissible limits that had been listed by Malaysian Food Regulation
(1985). Hazard index (HI) for Type A, Type B, Type C and Type D were 2.31 x
10-5, 2.57 x 10.-5, 2.22 x 10-5 and 2.48 x 10-5, respectively. All samples are safe to
consume and there is no potential non-carcinogenic risk since the HI values were
below unity. |
---|