Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method

In obtaining the best quality of engineering parts, the quality of machined surface plays an essential role. The fatigue strength, wear resistance, and corrosion of workpiece are some of the aspects of the qualities that can be improved. This paper investigates the effect of wire electrical discharg...

Full description

Bibliographic Details
Main Authors:	Banu, Asfana, Bakar, Mazilah Abu, Ali, Mohammad Yeakub, Adesta, Erry Yulian Triblas
Format:	Article
Language:	English
Published:	Deer Hill Publications 2017
Subjects:	T Technology (General) T55.4 Industrial engineering.Management engineering. TS Manufactures TS200 Metal manufactures. Metalworking
Online Access:	http://irep.iium.edu.my/60691/ http://irep.iium.edu.my/60691/ http://irep.iium.edu.my/60691/1/36-316-3-PB.pdf

id	iium-60691
recordtype	eprints
spelling	iium-606912017-12-24T15:30:39Z http://irep.iium.edu.my/60691/ Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method Banu, Asfana Bakar, Mazilah Abu Ali, Mohammad Yeakub Adesta, Erry Yulian Triblas T Technology (General) T55.4 Industrial engineering.Management engineering. TS Manufactures TS200 Metal manufactures. Metalworking In obtaining the best quality of engineering parts, the quality of machined surface plays an essential role. The fatigue strength, wear resistance, and corrosion of workpiece are some of the aspects of the qualities that can be improved. This paper investigates the effect of wire electrical discharge machining (WEDM) process parameters on surface roughness and kerf on stainless steel using distilled water as dielectric fluid and brass wire as tool electrode. The selected process parameters are voltage open, wire speed, wire tension, voltage gap, and off time. Empirical models using Taguchi method were developed for the estimation of surface roughness and kerf. The analysis revealed that off time has major influence on surface roughness and kerf. The optimum machining parameters for minimum surface roughness and kerf were found to be 10 V open voltage, 2.84 μs off time, 12 m/min wire speed, 6.3 N wire tension, and 54.91 V voltage gap. Deer Hill Publications 2017-12-10 Article PeerReviewed application/pdf en http://irep.iium.edu.my/60691/1/36-316-3-PB.pdf Banu, Asfana and Bakar, Mazilah Abu and Ali, Mohammad Yeakub and Adesta, Erry Yulian Triblas (2017) Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method. International Journal of Engineering Materials and Manufacture, 2 (4). pp. 103-109. E-ISSN 0128-1852 http://deerhillpublishing.com/index.php/ijemm/article/view/36
repository_type	Digital Repository
institution_category	Local University
institution	International Islamic University Malaysia
building	IIUM Repository
collection	Online Access
language	English
topic	T Technology (General) T55.4 Industrial engineering.Management engineering. TS Manufactures TS200 Metal manufactures. Metalworking
spellingShingle	T Technology (General) T55.4 Industrial engineering.Management engineering. TS Manufactures TS200 Metal manufactures. Metalworking Banu, Asfana Bakar, Mazilah Abu Ali, Mohammad Yeakub Adesta, Erry Yulian Triblas Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method
description	In obtaining the best quality of engineering parts, the quality of machined surface plays an essential role. The fatigue strength, wear resistance, and corrosion of workpiece are some of the aspects of the qualities that can be improved. This paper investigates the effect of wire electrical discharge machining (WEDM) process parameters on surface roughness and kerf on stainless steel using distilled water as dielectric fluid and brass wire as tool electrode. The selected process parameters are voltage open, wire speed, wire tension, voltage gap, and off time. Empirical models using Taguchi method were developed for the estimation of surface roughness and kerf. The analysis revealed that off time has major influence on surface roughness and kerf. The optimum machining parameters for minimum surface roughness and kerf were found to be 10 V open voltage, 2.84 μs off time, 12 m/min wire speed, 6.3 N wire tension, and 54.91 V voltage gap.
format	Article
author	Banu, Asfana Bakar, Mazilah Abu Ali, Mohammad Yeakub Adesta, Erry Yulian Triblas
author_facet	Banu, Asfana Bakar, Mazilah Abu Ali, Mohammad Yeakub Adesta, Erry Yulian Triblas
author_sort	Banu, Asfana
title	Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method
title_short	Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method
title_full	Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method
title_fullStr	Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method
title_full_unstemmed	Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method
title_sort	analysis of wedm process parameters on surface roughness and kerf using taguchi method
publisher	Deer Hill Publications
publishDate	2017
url	http://irep.iium.edu.my/60691/ http://irep.iium.edu.my/60691/ http://irep.iium.edu.my/60691/1/36-316-3-PB.pdf
first_indexed	2023-09-18T21:26:02Z
last_indexed	2023-09-18T21:26:02Z
_version_	1777412197788418048

Analysis of WEDM process parameters on surface roughness and kerf using Taguchi method

Similar Items