Frictional Behavior of Polymers Sliding Against Smooth and Rough Mild Steel Counter Faces
In the present study, friction coefficient and wear rate of polytetrafluoroethylene (commerciallyknown as teflon) and nylon sliding against mild steel are investigated experimentally. In order to do so, a pinon disc apparatus is designed and fabricated. Experiments are carried out when smooth or rou...
| Main Authors: | , , , , , , , , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
IDOSI Publications
2014
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/8591/ http://umpir.ump.edu.my/id/eprint/8591/ http://umpir.ump.edu.my/id/eprint/8591/ http://umpir.ump.edu.my/id/eprint/8591/1/Middle-East_Journal_of_Scientific_Research_-_Vol_21-No_3_-_2014.pdf |
| Summary: | In the present study, friction coefficient and wear rate of polytetrafluoroethylene (commerciallyknown as teflon) and nylon sliding against mild steel are investigated experimentally. In order to do so, a pinon disc apparatus is designed and fabricated. Experiments are carried out when smooth or rough mild steel pin slides on teflon and nylon disc. Experiments are conducted at normal load 10, 15 and 20 N, sliding velocity 1, 1.5 and 2 m/s and relative humidity 70%. Variations of friction coefficient with the duration of rubbing at different normal loads and sliding velocities are investigated. Results show that friction coefficient is in fluenced by duration of rubbing, normal load and sliding velocity. In general, friction coefficient increases for a certain duration of rubbing and after that it remains constant for the rest of the experimental time. The obtained results reveal that friction coefficient decreases with the increase in normal load for teflon and nylon mating with smooth or rough mild steel counter face. On the other hand, it is also found that friction coefficient increases with the increase in sliding velocity for both of the tested materials. Moreover, wear rate increases with the increase in normal load and sliding velocity. The magnitudes of friction coefficient and wear rate are different depending on sliding velocity and normal load for both smooth and rough counterface pin materials. |
|---|