Measurement and validation of fluid structure interface
This thesis is done to study about structure of pipeline network when it vibrated. The vibration of the structure can lead to problem. The objectives of the study are to determine the mode shape and natural frequency when the structure is vibrated. Besides that, in this study we also need to verify...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2013
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/8464/ http://umpir.ump.edu.my/id/eprint/8464/ http://umpir.ump.edu.my/id/eprint/8464/1/cd8159.pdf |
| Summary: | This thesis is done to study about structure of pipeline network when it vibrated. The vibration of the structure can lead to problem. The objectives of the study are to determine the mode shape and natural frequency when the structure is vibrated. Besides that, in this study we also need to verify the data that obtain. The method that will be use to conduct this study is experimental and simulation of pipeline network. In experimental we need to build the pipeline network structure. The design must consider the workplace. In simulation we need to draw the design of pipeline network in solidwork software, the parameter must follow in experimental method. This is because if use different parameter the data between both will be different. After that, comparison of the data between these two methods must be done, this is because the data must be verify whether it valid or not. The result will show the mode shape and natural frequency of structure. If the data is not valid the experiment need to be repeat until get the same data or approximately same. The data will be valid if the error between these two results is below than 5%. |
|---|