Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method

Electro discharge machining (EDM) is a process that use an electric sparks to generate the high temperature and melts the work piece. One of the processes using this method is drilling process. By using this concept, an electro thermal mechanism between electrode and work piece can creates the hole...

Full description

Bibliographic Details
Main Authors:	Hazami, Che Hussain, A. R., Yusoff
Format:	Article
Language:	English
Published:	Trans Tech Publications, Switzerland 2014
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/8425/ http://umpir.ump.edu.my/id/eprint/8425/ http://umpir.ump.edu.my/id/eprint/8425/ http://umpir.ump.edu.my/id/eprint/8425/1/fkm-2014-hazami-Optimization_of_Electro_Discharge%281%29.pdf

id	ump-8425
recordtype	eprints
spelling	ump-84252015-06-22T02:44:55Z http://umpir.ump.edu.my/id/eprint/8425/ Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method Hazami, Che Hussain A. R., Yusoff TJ Mechanical engineering and machinery Electro discharge machining (EDM) is a process that use an electric sparks to generate the high temperature and melts the work piece. One of the processes using this method is drilling process. By using this concept, an electro thermal mechanism between electrode and work piece can creates the hole enlargement and the size of the hole its depend on the diameters of electrode are used. The present study performs Taguchi method to investigate the optimal process parameters for high speed super drill machine that was used to make a small hole from titanium alloy (Ti-6: ASTM B348 Grade 5) by using 2.0 mm diameter of copper electrodes. In this experiment, the process parameters namely, current pulse off; maximum current and standard voltage level were selected to optimize. An orthogonal array L9 was employed to analyze the material removal rate (MRR) of the copper electrode of diameter 2.0 mm penetration. The optimum EDM hole process can be established through this method and the major parameters that effect the MRR can be also detected and verified the effectiveness through experimental results. Trans Tech Publications, Switzerland 2014 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/8425/1/fkm-2014-hazami-Optimization_of_Electro_Discharge%281%29.pdf Hazami, Che Hussain and A. R., Yusoff (2014) Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method. Advanced Materials Research, 903. pp. 129-134. ISSN 1022-6680 (print), 1662-8985 (online) http://www.scientific.net/AMR.903.129 DOI: 10.4028/www.scientific.net/AMR.903.129
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Hazami, Che Hussain A. R., Yusoff Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method
description	Electro discharge machining (EDM) is a process that use an electric sparks to generate the high temperature and melts the work piece. One of the processes using this method is drilling process. By using this concept, an electro thermal mechanism between electrode and work piece can creates the hole enlargement and the size of the hole its depend on the diameters of electrode are used. The present study performs Taguchi method to investigate the optimal process parameters for high speed super drill machine that was used to make a small hole from titanium alloy (Ti-6: ASTM B348 Grade 5) by using 2.0 mm diameter of copper electrodes. In this experiment, the process parameters namely, current pulse off; maximum current and standard voltage level were selected to optimize. An orthogonal array L9 was employed to analyze the material removal rate (MRR) of the copper electrode of diameter 2.0 mm penetration. The optimum EDM hole process can be established through this method and the major parameters that effect the MRR can be also detected and verified the effectiveness through experimental results.
format	Article
author	Hazami, Che Hussain A. R., Yusoff
author_facet	Hazami, Che Hussain A. R., Yusoff
author_sort	Hazami, Che Hussain
title	Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method
title_short	Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method
title_full	Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method
title_fullStr	Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method
title_full_unstemmed	Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method
title_sort	optimization of electro discharge machining parameters for drilling titanium in small holes using taguchi method
publisher	Trans Tech Publications, Switzerland
publishDate	2014
url	http://umpir.ump.edu.my/id/eprint/8425/ http://umpir.ump.edu.my/id/eprint/8425/ http://umpir.ump.edu.my/id/eprint/8425/ http://umpir.ump.edu.my/id/eprint/8425/1/fkm-2014-hazami-Optimization_of_Electro_Discharge%281%29.pdf
first_indexed	2023-09-18T22:05:59Z
last_indexed	2023-09-18T22:05:59Z
_version_	1777414711057317888

Optimization of Electro Discharge Machining Parameters for Drilling Titanium in Small Holes Using Taguchi Method

Similar Items