Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement

Palm oil clinker (POC) and oil palm shell (OPS) which is relatively low cost and abundantly available has the potential as a replacement for aggregates in the production of concrete. This study investigates the effects of substitution of palm oil clinker and oil palm shell aggregates towards the m...

Full description

Bibliographic Details
Main Author:	Mohd Fazrul Radziff, Ramli
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/7907/ http://umpir.ump.edu.my/id/eprint/7907/ http://umpir.ump.edu.my/id/eprint/7907/1/MOHD_FAZRUL_RADZIFF_BIN_RAMLI.PDF

id	ump-7907
recordtype	eprints
spelling	ump-79072016-07-26T04:12:14Z http://umpir.ump.edu.my/id/eprint/7907/ Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement Mohd Fazrul Radziff, Ramli TA Engineering (General). Civil engineering (General) Palm oil clinker (POC) and oil palm shell (OPS) which is relatively low cost and abundantly available has the potential as a replacement for aggregates in the production of concrete. This study investigates the effects of substitution of palm oil clinker and oil palm shell aggregates towards the mechanical properties of porous concrete which consist of density and compressive strength. The most suitable water cement ratio for the mixture of porous concrete was obtained through mix design and yielded a constant of 0.57. Four types of samples were prepared with the constant w/c of 0.57 and POC content of 5% for all mixture and OPS content of 0%, 5%, 10 1 /o and 15% by the weight of crushed granite aggregates respectively. The result of this study indicates that the substitution of POC and OPS aggregates in concrete reduces the density of concrete. The higher porosity achieved through the addition of POC aggregates contributes to the reduction in density. However, the replacement of crushed granite aggregates with POC and OPS aggregates resulted in a drop in strength development. The result shows that the compressive strength of concrete reduced significantly. This study indicates that concrete with POC and OPS content can be utilized as lightweight concrete but cannot be used for load bearing purposes due to low strength 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/7907/1/MOHD_FAZRUL_RADZIFF_BIN_RAMLI.PDF Mohd Fazrul Radziff, Ramli (2012) Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement. Faculty of Civil Engineering and Earth Resources , Universiti Malaysia Pahang . http://iportal.ump.edu.my/lib/item?id=chamo:76163&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Mohd Fazrul Radziff, Ramli Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
description	Palm oil clinker (POC) and oil palm shell (OPS) which is relatively low cost and abundantly available has the potential as a replacement for aggregates in the production of concrete. This study investigates the effects of substitution of palm oil clinker and oil palm shell aggregates towards the mechanical properties of porous concrete which consist of density and compressive strength. The most suitable water cement ratio for the mixture of porous concrete was obtained through mix design and yielded a constant of 0.57. Four types of samples were prepared with the constant w/c of 0.57 and POC content of 5% for all mixture and OPS content of 0%, 5%, 10 1 /o and 15% by the weight of crushed granite aggregates respectively. The result of this study indicates that the substitution of POC and OPS aggregates in concrete reduces the density of concrete. The higher porosity achieved through the addition of POC aggregates contributes to the reduction in density. However, the replacement of crushed granite aggregates with POC and OPS aggregates resulted in a drop in strength development. The result shows that the compressive strength of concrete reduced significantly. This study indicates that concrete with POC and OPS content can be utilized as lightweight concrete but cannot be used for load bearing purposes due to low strength
format	Undergraduates Project Papers
author	Mohd Fazrul Radziff, Ramli
author_facet	Mohd Fazrul Radziff, Ramli
author_sort	Mohd Fazrul Radziff, Ramli
title	Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
title_short	Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
title_full	Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
title_fullStr	Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
title_full_unstemmed	Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
title_sort	performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/7907/ http://umpir.ump.edu.my/id/eprint/7907/ http://umpir.ump.edu.my/id/eprint/7907/1/MOHD_FAZRUL_RADZIFF_BIN_RAMLI.PDF
first_indexed	2023-09-18T22:05:02Z
last_indexed	2023-09-18T22:05:02Z
_version_	1777414651749859328

Performance of concrete by using product waste material from palm oil (clinker and shell) as aggregate replacement

Similar Items