Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD

Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD

Direct Reduction Plant is a plant that can produce high quality of iron product. In this plant, the very important thing is the Partial Oxidation (PO) system that allows increasing the productive rate, the quality of Direct Reduced Iron (DRI), and can save the usage of natural gas consumption. Besid...

Full description

Bibliographic Details
Main Author: Muhammad Kamal, Jamali
Format: Undergraduates Project Papers
Language:English
Published: 2013
Subjects:
TP Chemical technology
Online Access:http://umpir.ump.edu.my/id/eprint/7063/
http://umpir.ump.edu.my/id/eprint/7063/
http://umpir.ump.edu.my/id/eprint/7063/1/CD7202.pdf
id ump-7063
recordtype eprints
spelling ump-70632015-03-03T09:34:06Z http://umpir.ump.edu.my/id/eprint/7063/ Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD Muhammad Kamal, Jamali TP Chemical technology Direct Reduction Plant is a plant that can produce high quality of iron product. In this plant, the very important thing is the Partial Oxidation (PO) system that allows increasing the productive rate, the quality of Direct Reduced Iron (DRI), and can save the usage of natural gas consumption. Besides, there is a transfer line with two oxygen lances is situated between the gas heater and reactor. The main objective of this study is to consider the oxygen to methane ratio supplied form the oxygen lance on the temperature profile in the combustion chamber. High temperature in the transfer line is needed in order to get high quality of iron product. In order to get the result, the simulation was performed by using Computational Fluid Dynamic (CFD) software that contents Fluent and Gambit. Volume meshing in GAMBIT is very important part before doing simulation in FLUENT as a solver. For further modification, only one lance of oxygen is considered in this study. Besides, the steady state condition of the partial oxidation system also included in this report. From this study, the temperature profile of Partial Oxidation system can be determined thus can give better performance for this system. 2013-02 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/7063/1/CD7202.pdf Muhammad Kamal, Jamali (2013) Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD. Faculty of Chemical and Natural Resources Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:74004&theme=UMP2
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TP Chemical technology
spellingShingle TP Chemical technology
Muhammad Kamal, Jamali
Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD
description Direct Reduction Plant is a plant that can produce high quality of iron product. In this plant, the very important thing is the Partial Oxidation (PO) system that allows increasing the productive rate, the quality of Direct Reduced Iron (DRI), and can save the usage of natural gas consumption. Besides, there is a transfer line with two oxygen lances is situated between the gas heater and reactor. The main objective of this study is to consider the oxygen to methane ratio supplied form the oxygen lance on the temperature profile in the combustion chamber. High temperature in the transfer line is needed in order to get high quality of iron product. In order to get the result, the simulation was performed by using Computational Fluid Dynamic (CFD) software that contents Fluent and Gambit. Volume meshing in GAMBIT is very important part before doing simulation in FLUENT as a solver. For further modification, only one lance of oxygen is considered in this study. Besides, the steady state condition of the partial oxidation system also included in this report. From this study, the temperature profile of Partial Oxidation system can be determined thus can give better performance for this system.
format Undergraduates Project Papers
author Muhammad Kamal, Jamali
author_facet Muhammad Kamal, Jamali
author_sort Muhammad Kamal, Jamali
title Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD
title_short Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD
title_full Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD
title_fullStr Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD
title_full_unstemmed Study the Effect of Oxygen to Methane Ratio on the Temperature of Partial Oxidation Unit at Direct Reduction Plant by Using CFD
title_sort study the effect of oxygen to methane ratio on the temperature of partial oxidation unit at direct reduction plant by using cfd
publishDate 2013
url http://umpir.ump.edu.my/id/eprint/7063/
http://umpir.ump.edu.my/id/eprint/7063/
http://umpir.ump.edu.my/id/eprint/7063/1/CD7202.pdf
first_indexed 2023-09-18T22:03:22Z
last_indexed 2023-09-18T22:03:22Z
_version_ 1777414546312396800

Similar Items