The Performance of Kicking by Different Boots Material
The purpose of this study was to investigate the kinematics of kicking by experimental and simulation techniques analysis. The differences of material stiffness will affected to the ball velocities. Experimental setup by high speed video camera with 250 frames per second was performed in order to ob...
Main Authors: | , , , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Faculty of Education. University of Alicante
2015
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/6708/ http://umpir.ump.edu.my/id/eprint/6708/ http://umpir.ump.edu.my/id/eprint/6708/1/The_Performance_of_Kicking_by_Different_Boots_Material.PDF |
id |
ump-6708 |
---|---|
recordtype |
eprints |
spelling |
ump-67082019-10-17T08:11:10Z http://umpir.ump.edu.my/id/eprint/6708/ The Performance of Kicking by Different Boots Material Zulkifli, Ahmad@Manap Mohd Aminuddin, Pi Remli Mohd Haziq, Nordin Nasrul Hadi, Johari Z., Ghazalli K., Kadirgama TJ Mechanical engineering and machinery The purpose of this study was to investigate the kinematics of kicking by experimental and simulation techniques analysis. The differences of material stiffness will affected to the ball velocities. Experimental setup by high speed video camera with 250 frames per second was performed in order to obtain the foot and ball velocities during the kicking process. There are 10 male football players from Majlis Sukan Negeri Terengganu (MSNT) were selected as subjects. Instep kicking with right foot was choosing due to the highest ball velocities can be produced by this technique. Simulation analysis by finite element analysis (FEA) then used to validate the results from experimental work done. Polyethylene material and 2.0mm thickness from boot C was considered as the best boot design compared to the others. It gives the highest maximum stress and the highest force to produce the highest ball velocity. The other variables related to the ball velocity such as coefficient of restitution (COR) and contact time. This study is useful to design the suitable material for each region of boots. It also can help the athletes to identify the characteristics of boot selection for different position on the field. Faculty of Education. University of Alicante 2015 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/6708/1/The_Performance_of_Kicking_by_Different_Boots_Material.PDF Zulkifli, Ahmad@Manap and Mohd Aminuddin, Pi Remli and Mohd Haziq, Nordin and Nasrul Hadi, Johari and Z., Ghazalli and K., Kadirgama (2015) The Performance of Kicking by Different Boots Material. Journal of Human Sport and Exercise, 10 (Proc 2). pp. 657-665. ISSN 1988-5202 http://dx.doi.org/10.14198/jhse.2015.10.Proc2.03 |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English |
topic |
TJ Mechanical engineering and machinery |
spellingShingle |
TJ Mechanical engineering and machinery Zulkifli, Ahmad@Manap Mohd Aminuddin, Pi Remli Mohd Haziq, Nordin Nasrul Hadi, Johari Z., Ghazalli K., Kadirgama The Performance of Kicking by Different Boots Material |
description |
The purpose of this study was to investigate the kinematics of kicking by experimental and simulation techniques analysis. The differences of material stiffness will affected to the ball velocities. Experimental setup by high speed video camera with 250 frames per second was performed in order to obtain the foot and ball velocities during the kicking process. There are 10 male football players from Majlis Sukan Negeri Terengganu (MSNT) were selected as
subjects. Instep kicking with right foot was choosing due to the highest ball velocities can be produced by this technique. Simulation analysis by finite element analysis (FEA) then used to validate the results from experimental work done. Polyethylene material and 2.0mm thickness
from boot C was considered as the best boot design compared to the others. It gives the highest maximum stress and the highest force to produce the highest ball velocity. The other variables related to the ball velocity such as coefficient of restitution (COR) and contact time. This study is useful to design the suitable material for each region of boots. It also can help the athletes to identify the characteristics of boot selection for different position on the field. |
format |
Article |
author |
Zulkifli, Ahmad@Manap Mohd Aminuddin, Pi Remli Mohd Haziq, Nordin Nasrul Hadi, Johari Z., Ghazalli K., Kadirgama |
author_facet |
Zulkifli, Ahmad@Manap Mohd Aminuddin, Pi Remli Mohd Haziq, Nordin Nasrul Hadi, Johari Z., Ghazalli K., Kadirgama |
author_sort |
Zulkifli, Ahmad@Manap |
title |
The Performance of Kicking by Different Boots Material |
title_short |
The Performance of Kicking by Different Boots Material |
title_full |
The Performance of Kicking by Different Boots Material |
title_fullStr |
The Performance of Kicking by Different Boots Material |
title_full_unstemmed |
The Performance of Kicking by Different Boots Material |
title_sort |
performance of kicking by different boots material |
publisher |
Faculty of Education. University of Alicante |
publishDate |
2015 |
url |
http://umpir.ump.edu.my/id/eprint/6708/ http://umpir.ump.edu.my/id/eprint/6708/ http://umpir.ump.edu.my/id/eprint/6708/1/The_Performance_of_Kicking_by_Different_Boots_Material.PDF |
first_indexed |
2023-09-18T22:02:42Z |
last_indexed |
2023-09-18T22:02:42Z |
_version_ |
1777414504303296512 |