Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant

This project presents the modelling of the material removal rate on grinding ductile iron using water based silicon dioxide (SiO) nanocoolant using response surface method. The grinding fluids used in this study are conventional coolant and water based SiO2 nanoparticle grinding fluid. The SiO2 nano...

Full description

Bibliographic Details
Main Author:	Zul Shukri , Nawawi
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/6520/ http://umpir.ump.edu.my/id/eprint/6520/ http://umpir.ump.edu.my/id/eprint/6520/1/CD6902.pdf

id	ump-6520
recordtype	eprints
spelling	ump-65202015-03-03T09:30:51Z http://umpir.ump.edu.my/id/eprint/6520/ Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant Zul Shukri , Nawawi TA Engineering (General). Civil engineering (General) This project presents the modelling of the material removal rate on grinding ductile iron using water based silicon dioxide (SiO) nanocoolant using response surface method. The grinding fluids used in this study are conventional coolant and water based SiO2 nanoparticle grinding fluid. The SiO2 nanocoolant is prepared using two step methods. The design of experiment for the grinding process is developed using central composite design method. The method of grinding process is single pass and multiple pass. For the experiment, the parameter has been considered as speed of table and depth of cut. The range of the speed of table is 20-40 m/min and the depth of cut is 20-60 µm. The surface roughness, G-ratio, temperature different, and also material removal rate are selected as the output parameters. The use of central composite design method is use to obtained the prediction model for material removal rate. The analysis of variance has been performed to check the adequacy of the develop mathematical model. It can be seen that the lack of fit for all models are less than 0.005 and R-square value for all model are more than 90 %. Therefore, the mathematical models for conventional and SiO nanocoolant with single and multiple pass grinding acceptable. The obtained results show the better medium for grinding fluid are the conventional grinding in terms of material removal rate however, the surface roughness for conventional coolant is poor compared to the SiO2 nanocoolant. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/6520/1/CD6902.pdf Zul Shukri , Nawawi (2012) Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant. Faculty of Mechanical Engineering , Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:77811&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Zul Shukri , Nawawi Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant
description	This project presents the modelling of the material removal rate on grinding ductile iron using water based silicon dioxide (SiO) nanocoolant using response surface method. The grinding fluids used in this study are conventional coolant and water based SiO2 nanoparticle grinding fluid. The SiO2 nanocoolant is prepared using two step methods. The design of experiment for the grinding process is developed using central composite design method. The method of grinding process is single pass and multiple pass. For the experiment, the parameter has been considered as speed of table and depth of cut. The range of the speed of table is 20-40 m/min and the depth of cut is 20-60 µm. The surface roughness, G-ratio, temperature different, and also material removal rate are selected as the output parameters. The use of central composite design method is use to obtained the prediction model for material removal rate. The analysis of variance has been performed to check the adequacy of the develop mathematical model. It can be seen that the lack of fit for all models are less than 0.005 and R-square value for all model are more than 90 %. Therefore, the mathematical models for conventional and SiO nanocoolant with single and multiple pass grinding acceptable. The obtained results show the better medium for grinding fluid are the conventional grinding in terms of material removal rate however, the surface roughness for conventional coolant is poor compared to the SiO2 nanocoolant.
format	Undergraduates Project Papers
author	Zul Shukri , Nawawi
author_facet	Zul Shukri , Nawawi
author_sort	Zul Shukri , Nawawi
title	Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant
title_short	Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant
title_full	Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant
title_fullStr	Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant
title_full_unstemmed	Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant
title_sort	modelling of material removal rate on grinding ductile iron using water based sio2 nanocoolant
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/6520/ http://umpir.ump.edu.my/id/eprint/6520/ http://umpir.ump.edu.my/id/eprint/6520/1/CD6902.pdf
first_indexed	2023-09-18T22:02:20Z
last_indexed	2023-09-18T22:02:20Z
_version_	1777414481829167104

Modelling of material removal rate on grinding ductile iron using water based SIO2 nanocoolant

Similar Items