Synthesis and Characterization of Carbon Fibers and their Application in Wood Composites
Carbon fibers were synthesized using a low-cost, economical method. Fresh rubber wood fibers (Hevea brasiliensis) were burned using a furnace in an inert condition at 350 to 450 oC for 2-4 hours, and after that the fibers were ground at 18000 rpm for 20 to 40 seconds. The effect of carbon fibers as...
Main Authors: | Gupta, Arun, Khan, Tanveer Ahmed, Saidatul Shima, Jamari, Rajan, Jose, Mohammed, Nasir, Anuj, Kumar |
---|---|
Format: | Article |
Language: | English |
Published: |
North Carolina State University
2013
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/6447/ http://umpir.ump.edu.my/id/eprint/6447/ http://umpir.ump.edu.my/id/eprint/6447/1/Effect_Of_Operation_Strategies_On_The_Economic_Performance_Of_A_Hybrid_Photovoltaic-Micro_Gas_Turbine_Trigeneration_System.pdf |
Similar Items
-
Synthesis and characterization of carbon microspheres from rubber wood by hydrothermal carbonization
by: Khan, Tanveer Ahmed, et al.
Published: (2019) -
Synthesis of Carbon Nano Fibers: Fabrication and Characterization of Carbon Nano Fibers/rea-formaldehyde Resin
by: Khan, Tanveer Ahmed, et al.
Published: (2014) -
Characterization of Functionalized Low Density Polyethylene/Polyaniline Nano Fiber Composite
by: Mohib Reza, Kazimi, et al.
Published: (2014) -
Examination of Selected Synthesis Parameters for Composite Adhesive-type Urea-Formaldehyde/activated Carbon Adhesives
by: Gupta, Arun, et al.
Published: (2015) -
Synthesis of Activated Carbon Particles: Fabrication and Characterization of Activated carbon Particles/Urea-formaldehyde Resin
by: Khan, Tanveer Ahmed, et al.
Published: (2014)