Influence of Factorial Design Analysis on the Performance of Bisphenol A Molecular Imprinted Polymer
The main issue in the synthesis of molecular imprinted polymer nanoparticles is the identification and optimization of the key factors affecting the material structure and molecular recognition properties. This paper focus on the application of experimental design approach to synthesis bisphenol A m...
| Main Authors: | , |
|---|---|
| Format: | Article |
| Language: | English |
| Published: |
World Academy of Reseacrh and Publication
2012
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/5743/ http://umpir.ump.edu.my/id/eprint/5743/ http://umpir.ump.edu.my/id/eprint/5743/1/fkksa-2012-cheku-influence_of_factorial.pdf |
| Summary: | The main issue in the synthesis of molecular imprinted polymer nanoparticles is the identification and optimization of the key factors affecting the material structure and molecular recognition properties. This paper focus on the application of experimental design approach to synthesis bisphenol A molecular imprinted polymers (BPA-MIPs) aimed at the effect on polymerisation temperature, agitation rate, cross-linker to solvent ratio, and percentage of initiator; and determine the influence on hydrolysis breakage to remove template molecule, discussed by FTIR spectra results. The polymers were prepared under thermal suspension polymerization and their functional group stretching and degradation was evaluated. The results presented demonstrate the importance of keeping the right balance between the four parameters conditions which are approximately 55°C, 100rpm, 65% solvent ratio and 1% initiator, respectively. The FTIR results shows that the particle sizes variation affects the performance of MIP where particles with 4 #m size reached 84% removal within time constrain rather than particles with 514 #m size only manage 40% of template removal. Generally, it could be concluded that smaller MIPs achieve removal better than the bigger ones and is expected to perform better in further investigations.
|
|---|