Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)

Finite element evaluation is one of the methods in predicting the strain value in sheet metal bending. Predicting the strain value is sometimes used in areas of plastic deformation, which is the integral of the ratio of the incremental change in length to the instantaneous length of a plastically de...

Full description

Bibliographic Details
Main Author:	Abdul Zarif, Abdul Malek
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/4905/ http://umpir.ump.edu.my/id/eprint/4905/ http://umpir.ump.edu.my/id/eprint/4905/1/cd7283_75.pdf

id	ump-4905
recordtype	eprints
spelling	ump-49052015-03-03T09:21:54Z http://umpir.ump.edu.my/id/eprint/4905/ Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB) Abdul Zarif, Abdul Malek TA Engineering (General). Civil engineering (General) Finite element evaluation is one of the methods in predicting the strain value in sheet metal bending. Predicting the strain value is sometimes used in areas of plastic deformation, which is the integral of the ratio of the incremental change in length to the instantaneous length of a plastically deformed. This thesis aims to evaluate the reliability of finite element method by comparing the results with experimental results. The effect of parameters such as length of displacement after bend also has been studied. Abaqus software has been used to simulate the bending process and the mechanical properties provided from the Solidwork data will be used to run the simulation. In the four-point bending experiment, the test rig was clamped on Shimadzu machine and the mild steel sheets was assembled with strain gauge before bend process was run. Strain value being measured with Dasylab software. The results from the experiment and simulation is slightly different for value of strain, which the simulation shows the value of strain higher than strain value that was get from the experiment. For the free force four-point bending, value length displacement after bend almost the same on the simulation and experimental. Finite element method can be used to make comparison since the pattern of the graphs are nearly the same and percentages of error are below 10 %. The further study on parameters that effected bending process will make the finite element method is important in the future. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/4905/1/cd7283_75.pdf Abdul Zarif, Abdul Malek (2012) Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB). Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:75461&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Abdul Zarif, Abdul Malek Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)
description	Finite element evaluation is one of the methods in predicting the strain value in sheet metal bending. Predicting the strain value is sometimes used in areas of plastic deformation, which is the integral of the ratio of the incremental change in length to the instantaneous length of a plastically deformed. This thesis aims to evaluate the reliability of finite element method by comparing the results with experimental results. The effect of parameters such as length of displacement after bend also has been studied. Abaqus software has been used to simulate the bending process and the mechanical properties provided from the Solidwork data will be used to run the simulation. In the four-point bending experiment, the test rig was clamped on Shimadzu machine and the mild steel sheets was assembled with strain gauge before bend process was run. Strain value being measured with Dasylab software. The results from the experiment and simulation is slightly different for value of strain, which the simulation shows the value of strain higher than strain value that was get from the experiment. For the free force four-point bending, value length displacement after bend almost the same on the simulation and experimental. Finite element method can be used to make comparison since the pattern of the graphs are nearly the same and percentages of error are below 10 %. The further study on parameters that effected bending process will make the finite element method is important in the future.
format	Undergraduates Project Papers
author	Abdul Zarif, Abdul Malek
author_facet	Abdul Zarif, Abdul Malek
author_sort	Abdul Zarif, Abdul Malek
title	Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)
title_short	Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)
title_full	Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)
title_fullStr	Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)
title_full_unstemmed	Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)
title_sort	experimental and simulation study on the effect of friction in a four-point bending test (4pb)
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/4905/ http://umpir.ump.edu.my/id/eprint/4905/ http://umpir.ump.edu.my/id/eprint/4905/1/cd7283_75.pdf
first_indexed	2023-09-18T21:59:54Z
last_indexed	2023-09-18T21:59:54Z
_version_	1777414328333369344

Experimental and simulation study on the effect of friction in a Four-Point Bending Test (4PB)

Similar Items