Single objective optimization of EDM machining on titanium workpiece using Taguchi method
Electrical discharge machining (EDM) is a process for shaping hard metals and forming deep complex shaped holes by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to investigate how the polarity, peak current, pulse on duration, pulse off duration and servo v...
Main Author: | |
---|---|
Format: | Undergraduates Project Papers |
Language: | English |
Published: |
2012
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/4881/ http://umpir.ump.edu.my/id/eprint/4881/ http://umpir.ump.edu.my/id/eprint/4881/1/cd7286_94.pdf |
id |
ump-4881 |
---|---|
recordtype |
eprints |
spelling |
ump-48812015-03-03T09:21:45Z http://umpir.ump.edu.my/id/eprint/4881/ Single objective optimization of EDM machining on titanium workpiece using Taguchi method Wan Mohd Ariff, Wan Azli TJ Mechanical engineering and machinery Electrical discharge machining (EDM) is a process for shaping hard metals and forming deep complex shaped holes by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to investigate how the polarity, peak current, pulse on duration, pulse off duration and servo voltage in EDM effect on material removal rate (MRR), electrode wear ratio (EWR) and surface roughness (SR). The effectiveness of EDM process with titanium alloy (Ti-6Al-4V )through electrical discharge machining (EDM) using copper tungsten (CuW)as an electrode.It is observed that copper tungsten (CuW) is most suitable for use as the tool electrode in EDM of Ti-6Al-4V .Better machining performance is obtained generally with the electrode as the cathode and the workpiece as an anode. In this research, a study was carried out on the influence of the parameters such as polarity, peak current, pulse on duration, pulse off duration and servo voltage. The surface quality that was investigated in this experiment was surface roughness using perthometer machine. Material removal rate (MRR) and electrode wear (EW) in this experiment was calculated by using mathematical method. The result of the experiment then was collected and analyzed using MINITAB software. This was done by using the technique of design of experiments (DOE) and technique such as ANOVA analysis. This analysis was purposed to select the optimal machining condition for use in confirmation test. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/4881/1/cd7286_94.pdf Wan Mohd Ariff, Wan Azli (2012) Single objective optimization of EDM machining on titanium workpiece using Taguchi method. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:75417&theme=UMP2 |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English |
topic |
TJ Mechanical engineering and machinery |
spellingShingle |
TJ Mechanical engineering and machinery Wan Mohd Ariff, Wan Azli Single objective optimization of EDM machining on titanium workpiece using Taguchi method |
description |
Electrical discharge machining (EDM) is a process for shaping hard metals and forming deep complex shaped holes by arc erosion in all kinds of electro-conductive materials. The objective of this paper is to investigate how the polarity, peak current, pulse on duration, pulse off duration and servo voltage in EDM effect on material removal rate (MRR), electrode wear ratio (EWR) and surface roughness (SR). The effectiveness of EDM process with titanium alloy (Ti-6Al-4V )through electrical discharge machining (EDM) using copper tungsten (CuW)as an electrode.It is observed that copper tungsten (CuW) is most suitable for use as the tool electrode in EDM of Ti-6Al-4V .Better machining performance is obtained generally with the electrode as the cathode and the workpiece as an anode. In this research, a study was carried out on the influence of the parameters such as polarity, peak current, pulse on duration, pulse off duration and servo voltage. The surface quality that was investigated in this experiment was surface roughness using perthometer machine. Material removal rate (MRR) and electrode wear (EW) in this experiment was calculated by using mathematical method. The result of the experiment then was collected and analyzed using MINITAB software. This was done by using the technique of design of experiments (DOE) and technique such as ANOVA analysis. This analysis was purposed to select the optimal machining condition for use in confirmation test. |
format |
Undergraduates Project Papers |
author |
Wan Mohd Ariff, Wan Azli |
author_facet |
Wan Mohd Ariff, Wan Azli |
author_sort |
Wan Mohd Ariff, Wan Azli |
title |
Single objective optimization of EDM machining on titanium workpiece using Taguchi method |
title_short |
Single objective optimization of EDM machining on titanium workpiece using Taguchi method |
title_full |
Single objective optimization of EDM machining on titanium workpiece using Taguchi method |
title_fullStr |
Single objective optimization of EDM machining on titanium workpiece using Taguchi method |
title_full_unstemmed |
Single objective optimization of EDM machining on titanium workpiece using Taguchi method |
title_sort |
single objective optimization of edm machining on titanium workpiece using taguchi method |
publishDate |
2012 |
url |
http://umpir.ump.edu.my/id/eprint/4881/ http://umpir.ump.edu.my/id/eprint/4881/ http://umpir.ump.edu.my/id/eprint/4881/1/cd7286_94.pdf |
first_indexed |
2023-09-18T21:59:51Z |
last_indexed |
2023-09-18T21:59:51Z |
_version_ |
1777414325015674880 |