BMM87 bearing load on a brass pin with aluminium plates
The investigation is about the bearing load on a brass pin joined with Aluminium thin plates of variables thickness. The experiment had done using various dimensions of the specimens which is pin diameter, plates thickness and plate thickness to diameter ratio, t/D. The specimens were tested using u...
Main Author: | Mohd Nur Hilmi, Mohd Nazih |
---|---|
Format: | Undergraduates Project Papers |
Language: | English |
Published: |
2012
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/4604/ http://umpir.ump.edu.my/id/eprint/4604/ http://umpir.ump.edu.my/id/eprint/4604/1/cd6642_91.pdf |
Similar Items
-
Types of damage in pin-loaded aluminum plate and other material
by: Mohammad Afifi, Mohammad
Published: (2009) -
Investigation on the shear joints failure with tensile loading for aluminum pins
by: Mohd Firdaus, Mohd Zaid
Published: (2009) -
Loading on aluminium rivet joint
by: Muhammad Fikri , Md Naziar
Published: (2012) -
Endurance limit of aluminum, brass and mild steel on different surface finish owing to cyclic loads
by: Ahmad Fitri, Zainal Abidin
Published: (2009) -
Compressed Stabilised Earth as Load Bearing Interlocking Block
by: Nasly, Mohamed Ali, et al.
Published: (2010)