Battery charger with alarm application
Unlike any other battery charger, this project is about the combination of battery charger circuit with alarm circuit. The main objective of this project is the alarm will send signal to the user. Thus, the user will know that the batteries are already fully charged. It consists of 3 segments, the p...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2008
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/446/ http://umpir.ump.edu.my/id/eprint/446/1/Radin_Mohd_Akhimullah.pdf |
| id |
ump-446 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-4462015-03-03T06:03:28Z http://umpir.ump.edu.my/id/eprint/446/ Battery charger with alarm application Radin Mohd Akhimullah, Mohd Idrus TK Electrical engineering. Electronics Nuclear engineering Unlike any other battery charger, this project is about the combination of battery charger circuit with alarm circuit. The main objective of this project is the alarm will send signal to the user. Thus, the user will know that the batteries are already fully charged. It consists of 3 segments, the power supply, charging circuit and alarm circuit. In this project, the charging process is focus more on AA batteries. The heart of the circuit located at LM324. It is the segment that controlling the charging process of the whole circuit. 2 pins are required. First pin (pin 12) is for Upper Limit Set, while the second pin (pin 9) is for lower limit set. This both pin sending the signal as a reference value. The upper limit send an information that the batteries is overcharged while the lower limit send the information about batteries deep discharge. Both of them are controlled by a potentiometer. When this is happen, the LM324 will send signal to the transistor. This transistor than operates thus energizes the relay coil. When the relay retracted, the charging process is halt and at the same time, operates the buzzer. The buzzer will continue to ring until the charger is turn off. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/446/1/Radin_Mohd_Akhimullah.pdf Radin Mohd Akhimullah, Mohd Idrus (2008) Battery charger with alarm application. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang. |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TK Electrical engineering. Electronics Nuclear engineering |
| spellingShingle |
TK Electrical engineering. Electronics Nuclear engineering Radin Mohd Akhimullah, Mohd Idrus Battery charger with alarm application |
| description |
Unlike any other battery charger, this project is about the combination of battery charger circuit with alarm circuit. The main objective of this project is the alarm will send signal to the user. Thus, the user will know that the batteries are already fully charged. It consists of 3 segments, the power supply, charging circuit and alarm circuit. In this project, the charging process is focus more on AA batteries. The heart of the circuit located at LM324. It is the segment that controlling the charging process of the whole circuit. 2 pins are required. First pin (pin 12) is for Upper Limit Set, while the second pin (pin 9) is for lower limit set. This both pin sending the signal as a reference value. The upper limit send an information that the batteries is overcharged while the lower limit send the information about batteries deep discharge. Both of them are controlled by a potentiometer. When this is happen, the LM324 will send signal to the transistor. This transistor than operates thus energizes the relay coil. When the relay retracted, the charging process is halt and at the same time, operates the buzzer. The buzzer will continue to ring until the charger is turn off. |
| format |
Undergraduates Project Papers |
| author |
Radin Mohd Akhimullah, Mohd Idrus |
| author_facet |
Radin Mohd Akhimullah, Mohd Idrus |
| author_sort |
Radin Mohd Akhimullah, Mohd Idrus |
| title |
Battery charger with alarm application |
| title_short |
Battery charger with alarm application |
| title_full |
Battery charger with alarm application |
| title_fullStr |
Battery charger with alarm application |
| title_full_unstemmed |
Battery charger with alarm application |
| title_sort |
battery charger with alarm application |
| publishDate |
2008 |
| url |
http://umpir.ump.edu.my/id/eprint/446/ http://umpir.ump.edu.my/id/eprint/446/1/Radin_Mohd_Akhimullah.pdf |
| first_indexed |
2023-09-18T21:52:40Z |
| last_indexed |
2023-09-18T21:52:40Z |
| _version_ |
1777413873039572992 |