Microcontroller based buck PID

This thesis revises of power electronic conversion techniques for switch-mode power converters for buck topology. Since the DC/DC converters are often used to provide a DC regulated output voltage, it also can be used to provide voltage isolation as well as the required regulated output voltage. The...

Full description

Bibliographic Details
Main Author:	Siti Jamilah, Mahful
Format:	Undergraduates Project Papers
Language:	English
Published:	2008
Subjects:	TK Electrical engineering. Electronics Nuclear engineering
Online Access:	http://umpir.ump.edu.my/id/eprint/433/ http://umpir.ump.edu.my/id/eprint/433/ http://umpir.ump.edu.my/id/eprint/433/1/SITI_JAMILAH_MAHFUL.pdf

id	ump-433
recordtype	eprints
spelling	ump-4332015-03-03T06:03:21Z http://umpir.ump.edu.my/id/eprint/433/ Microcontroller based buck PID Siti Jamilah, Mahful TK Electrical engineering. Electronics Nuclear engineering This thesis revises of power electronic conversion techniques for switch-mode power converters for buck topology. Since the DC/DC converters are often used to provide a DC regulated output voltage, it also can be used to provide voltage isolation as well as the required regulated output voltage. The future project or demand is looking towards alternative power sources all of which will need to be regulated in one form or another with highest efficiency, high availability and high reliability with the lowest cost, smallest size and weight. Therefore, the parameters required for implement this converter based on system design. In addition to do this, the closed loop feedback system using PID controller method will be implement to against the voltage drop or load change in the system. This project perform is only limited to design the closed-loop feedback system using proportional technique for buck converter. The controller will be implemented on a PIC microcontroller (PIC18F4550) and programmed through a computer using software of Microcode Studio. The programmed PIC184550 will be able to automatically control the duty cycle of the system in order to apply an appropriate duty cycle to the system. The benefit of this project is result to improvement in percent overshoot depend on the voltage change and maintain output voltage needed. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/433/1/SITI_JAMILAH_MAHFUL.pdf Siti Jamilah, Mahful (2008) Microcontroller based buck PID. Faculty of Electrical & Electronic Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:38245&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TK Electrical engineering. Electronics Nuclear engineering
spellingShingle	TK Electrical engineering. Electronics Nuclear engineering Siti Jamilah, Mahful Microcontroller based buck PID
description	This thesis revises of power electronic conversion techniques for switch-mode power converters for buck topology. Since the DC/DC converters are often used to provide a DC regulated output voltage, it also can be used to provide voltage isolation as well as the required regulated output voltage. The future project or demand is looking towards alternative power sources all of which will need to be regulated in one form or another with highest efficiency, high availability and high reliability with the lowest cost, smallest size and weight. Therefore, the parameters required for implement this converter based on system design. In addition to do this, the closed loop feedback system using PID controller method will be implement to against the voltage drop or load change in the system. This project perform is only limited to design the closed-loop feedback system using proportional technique for buck converter. The controller will be implemented on a PIC microcontroller (PIC18F4550) and programmed through a computer using software of Microcode Studio. The programmed PIC184550 will be able to automatically control the duty cycle of the system in order to apply an appropriate duty cycle to the system. The benefit of this project is result to improvement in percent overshoot depend on the voltage change and maintain output voltage needed.
format	Undergraduates Project Papers
author	Siti Jamilah, Mahful
author_facet	Siti Jamilah, Mahful
author_sort	Siti Jamilah, Mahful
title	Microcontroller based buck PID
title_short	Microcontroller based buck PID
title_full	Microcontroller based buck PID
title_fullStr	Microcontroller based buck PID
title_full_unstemmed	Microcontroller based buck PID
title_sort	microcontroller based buck pid
publishDate	2008
url	http://umpir.ump.edu.my/id/eprint/433/ http://umpir.ump.edu.my/id/eprint/433/ http://umpir.ump.edu.my/id/eprint/433/1/SITI_JAMILAH_MAHFUL.pdf
first_indexed	2023-09-18T21:52:38Z
last_indexed	2023-09-18T21:52:38Z
_version_	1777413871140601856

Microcontroller based buck PID

Similar Items