Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning
In this study, the Taguchi Method is used to find the optimal cutting parameters for surface roughness in turning operation.The orthogonal array,the signal-to-noise ratio, and analysis of variance are employed to study the performance characteristics in turning operations of AISI 1030 steel bars usi...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2008
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/3857/ http://umpir.ump.edu.my/id/eprint/3857/ http://umpir.ump.edu.my/id/eprint/3857/1/MOHD_NAIIM_B_YUSOFF.PDF |
| id |
ump-3857 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-38572015-03-03T09:16:33Z http://umpir.ump.edu.my/id/eprint/3857/ Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning Mohamad Naim, Yusoff TS Manufactures In this study, the Taguchi Method is used to find the optimal cutting parameters for surface roughness in turning operation.The orthogonal array,the signal-to-noise ratio, and analysis of variance are employed to study the performance characteristics in turning operations of AISI 1030 steel bars using TiN coated tools.Three cutting parameters namely,insert radius,feed rate,and depth of cut,are optimized with considerations of surface roughness.Experimental results are provided to illustrate the effectiveness of this approach. 2008-05 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3857/1/MOHD_NAIIM_B_YUSOFF.PDF Mohamad Naim, Yusoff (2008) Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning. Faculty of Mechanical Engineering , Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:39586&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TS Manufactures |
| spellingShingle |
TS Manufactures Mohamad Naim, Yusoff Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| description |
In this study, the Taguchi Method is used to find the optimal cutting parameters for surface roughness in turning operation.The orthogonal array,the signal-to-noise ratio, and analysis of variance are employed to study the performance characteristics in turning operations of AISI 1030 steel bars using TiN coated tools.Three cutting parameters namely,insert radius,feed rate,and depth of cut,are optimized with considerations of surface roughness.Experimental results are
provided to illustrate the effectiveness of this approach. |
| format |
Undergraduates Project Papers |
| author |
Mohamad Naim, Yusoff |
| author_facet |
Mohamad Naim, Yusoff |
| author_sort |
Mohamad Naim, Yusoff |
| title |
Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| title_short |
Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| title_full |
Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| title_fullStr |
Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| title_full_unstemmed |
Application of Taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| title_sort |
application of taguchi methods in the optimization of cutting parameters for surface roughness in turning |
| publishDate |
2008 |
| url |
http://umpir.ump.edu.my/id/eprint/3857/ http://umpir.ump.edu.my/id/eprint/3857/ http://umpir.ump.edu.my/id/eprint/3857/1/MOHD_NAIIM_B_YUSOFF.PDF |
| first_indexed |
2023-09-18T21:58:25Z |
| last_indexed |
2023-09-18T21:58:25Z |
| _version_ |
1777414234457505792 |