Design of mini CNC machine

This thesis presents the design of Mini CNC Machine. This machine has 2axes, namely the Xand Y axis. Mini CNC machine is a small CNC machine that can operate like a normal CNC machine with a limited area of the machining. The objectives of this project are to develop the mini CNC Machine and to deve...

Full description

Bibliographic Details
Main Author:	Nur Suraini, Hashim
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/3475/ http://umpir.ump.edu.my/id/eprint/3475/ http://umpir.ump.edu.my/id/eprint/3475/1/cd6275_66.pdf

id	ump-3475
recordtype	eprints
spelling	ump-34752019-12-10T06:55:04Z http://umpir.ump.edu.my/id/eprint/3475/ Design of mini CNC machine Nur Suraini, Hashim TJ Mechanical engineering and machinery This thesis presents the design of Mini CNC Machine. This machine has 2axes, namely the Xand Y axis. Mini CNC machine is a small CNC machine that can operate like a normal CNC machine with a limited area of the machining. The objectives of this project are to develop the mini CNC Machine and to develop the software to control the machine. This thesis describes the development of the machine and the criteria needed to build the machine. The Mini CNC Machine is initially sketched by referring to the criteria that was decided. The criteria are the travel path length, type of linear motion, type of linear drive, motor and controller, and type of material that used. This machine’s travel on the X axis is 15cm and Y axis is 15cm. The linear motion was used is a round linear rail and the linear drive used was a sliding element, lead nuts and lead screws. The motor used is a stepper motor with specification 2.1V and 3.0A. The frame material used is aluminium. This material is used because it is light in weight, easy to handle and machine and it is rust proof. The design was sketched using SolidWork software. For the next step is developing the wiring for motor and develop the program to control the stepper motor. The ULN 2803 is used to convert the signal from parallel port to specific winding energizing sequences to step the motor. The Visual Basic software is used to program the motor movement. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3475/1/cd6275_66.pdf Nur Suraini, Hashim (2012) Design of mini CNC machine. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my:8080/lib/item?id=chamo:66622&theme=UMP
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Nur Suraini, Hashim Design of mini CNC machine
description	This thesis presents the design of Mini CNC Machine. This machine has 2axes, namely the Xand Y axis. Mini CNC machine is a small CNC machine that can operate like a normal CNC machine with a limited area of the machining. The objectives of this project are to develop the mini CNC Machine and to develop the software to control the machine. This thesis describes the development of the machine and the criteria needed to build the machine. The Mini CNC Machine is initially sketched by referring to the criteria that was decided. The criteria are the travel path length, type of linear motion, type of linear drive, motor and controller, and type of material that used. This machine’s travel on the X axis is 15cm and Y axis is 15cm. The linear motion was used is a round linear rail and the linear drive used was a sliding element, lead nuts and lead screws. The motor used is a stepper motor with specification 2.1V and 3.0A. The frame material used is aluminium. This material is used because it is light in weight, easy to handle and machine and it is rust proof. The design was sketched using SolidWork software. For the next step is developing the wiring for motor and develop the program to control the stepper motor. The ULN 2803 is used to convert the signal from parallel port to specific winding energizing sequences to step the motor. The Visual Basic software is used to program the motor movement.
format	Undergraduates Project Papers
author	Nur Suraini, Hashim
author_facet	Nur Suraini, Hashim
author_sort	Nur Suraini, Hashim
title	Design of mini CNC machine
title_short	Design of mini CNC machine
title_full	Design of mini CNC machine
title_fullStr	Design of mini CNC machine
title_full_unstemmed	Design of mini CNC machine
title_sort	design of mini cnc machine
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/3475/ http://umpir.ump.edu.my/id/eprint/3475/ http://umpir.ump.edu.my/id/eprint/3475/1/cd6275_66.pdf
first_indexed	2023-09-18T21:57:49Z
last_indexed	2023-09-18T21:57:49Z
_version_	1777414196975108096

Design of mini CNC machine

Similar Items