Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel

Since the phenomenon of tool life still not fully understood although many research and case study have been done before, an investigation on the tool wear rate and surface roughness value being done for three types of workpiece material which are aluminium, mild steel and P20 while cutting tool tha...

Full description

Bibliographic Details
Main Author:	Nadirah, Ismail
Format:	Undergraduates Project Papers
Language:	English
Published:	2012
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/3453/ http://umpir.ump.edu.my/id/eprint/3453/ http://umpir.ump.edu.my/id/eprint/3453/1/cd6254_69.pdf

id	ump-3453
recordtype	eprints
spelling	ump-34532015-03-03T08:01:17Z http://umpir.ump.edu.my/id/eprint/3453/ Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel Nadirah, Ismail TJ Mechanical engineering and machinery Since the phenomenon of tool life still not fully understood although many research and case study have been done before, an investigation on the tool wear rate and surface roughness value being done for three types of workpiece material which are aluminium, mild steel and P20 while cutting tool that been used is carbide coated insert. The main reason for this investigation is to study and understand the behavior of cutting tool in order to determine the tool wear rate and tool life. From this investigation, surface roughness value for each type of workpiece material, Ra also can be collected. This investigation been done by applying high speed machining (HSM) concept, which high feed rate with light depth of cut. 2012-06 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3453/1/cd6254_69.pdf Nadirah, Ismail (2012) Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel. Faculty of Manufacturing Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my:8080/lib/item?id=chamo:67037&theme=UMP
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Nadirah, Ismail Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
description	Since the phenomenon of tool life still not fully understood although many research and case study have been done before, an investigation on the tool wear rate and surface roughness value being done for three types of workpiece material which are aluminium, mild steel and P20 while cutting tool that been used is carbide coated insert. The main reason for this investigation is to study and understand the behavior of cutting tool in order to determine the tool wear rate and tool life. From this investigation, surface roughness value for each type of workpiece material, Ra also can be collected. This investigation been done by applying high speed machining (HSM) concept, which high feed rate with light depth of cut.
format	Undergraduates Project Papers
author	Nadirah, Ismail
author_facet	Nadirah, Ismail
author_sort	Nadirah, Ismail
title	Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
title_short	Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
title_full	Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
title_fullStr	Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
title_full_unstemmed	Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel
title_sort	influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and p20 tool steel
publishDate	2012
url	http://umpir.ump.edu.my/id/eprint/3453/ http://umpir.ump.edu.my/id/eprint/3453/ http://umpir.ump.edu.my/id/eprint/3453/1/cd6254_69.pdf
first_indexed	2023-09-18T21:57:46Z
last_indexed	2023-09-18T21:57:46Z
_version_	1777414193910120448

Influence of varying depth of cut and feed rate to tool wear rate and surface roughness in aluminium, mild steel and P20 tool steel

Similar Items