Development of hybrid membrane (polysulfone and zeolites) for gas separation application

Objectives of this research are developing and fabricate hybrid membrane (polysulfone and zeolites) for gas application, in a way to increase the selectivity and permeability. To achieve this characteristics polymer, zeolites and coupling agent were used as material to produce this hybrid membrane....

Full description

Bibliographic Details
Main Author:	Siti Badriah, Harun
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TP Chemical technology
Online Access:	http://umpir.ump.edu.my/id/eprint/3425/ http://umpir.ump.edu.my/id/eprint/3425/ http://umpir.ump.edu.my/id/eprint/3425/1/CD5949_SITI_BADRIAH_BT_HARUN.pdf

id	ump-3425
recordtype	eprints
spelling	ump-34252015-03-03T08:01:05Z http://umpir.ump.edu.my/id/eprint/3425/ Development of hybrid membrane (polysulfone and zeolites) for gas separation application Siti Badriah, Harun TP Chemical technology Objectives of this research are developing and fabricate hybrid membrane (polysulfone and zeolites) for gas application, in a way to increase the selectivity and permeability. To achieve this characteristics polymer, zeolites and coupling agent were used as material to produce this hybrid membrane. In the experiment, the membrane prepared at different zeolites and chloroform loading. The solution was stirred at 24 hours to get a homogenous solution. New coupling agent (a mix of formaldehyde and carboxylic acid) was used. After casting process, the membrane was tested by permeation cell to study the permeability and selectivity of the produced membrane. Several gases were used to test this membrane such as O2, N2, CH4 and CO2. The result was compared to original membrane which means the membrane not mix with zeolites. The permeability and selectivity values for 40% zeolites loading for gas CO2 and CO2/CH4 were 995 X 10-6 and 0.889. Results for O2 and O2/N2 were 732 X 10-6 and 0.660. For zeolites loading 12%, permeability and selectivity values for gas CO2 and CO2/CH4 were 595 X 10-6 and 0539. For O2 and O2/N2, the values were 947 X 10-6 and 1.008. Result obtained was not at the standard values due to incompatibility of new coupling agent used, and the pair of zeolitespolymer. To produce hybrid membrane, the parameter studied, the zeolites and polymer pair and the use appropriate of coupling agent are very important. 2010-04 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/3425/1/CD5949_SITI_BADRIAH_BT_HARUN.pdf Siti Badriah, Harun (2010) Development of hybrid membrane (polysulfone and zeolites) for gas separation application. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:58727&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TP Chemical technology
spellingShingle	TP Chemical technology Siti Badriah, Harun Development of hybrid membrane (polysulfone and zeolites) for gas separation application
description	Objectives of this research are developing and fabricate hybrid membrane (polysulfone and zeolites) for gas application, in a way to increase the selectivity and permeability. To achieve this characteristics polymer, zeolites and coupling agent were used as material to produce this hybrid membrane. In the experiment, the membrane prepared at different zeolites and chloroform loading. The solution was stirred at 24 hours to get a homogenous solution. New coupling agent (a mix of formaldehyde and carboxylic acid) was used. After casting process, the membrane was tested by permeation cell to study the permeability and selectivity of the produced membrane. Several gases were used to test this membrane such as O2, N2, CH4 and CO2. The result was compared to original membrane which means the membrane not mix with zeolites. The permeability and selectivity values for 40% zeolites loading for gas CO2 and CO2/CH4 were 995 X 10-6 and 0.889. Results for O2 and O2/N2 were 732 X 10-6 and 0.660. For zeolites loading 12%, permeability and selectivity values for gas CO2 and CO2/CH4 were 595 X 10-6 and 0539. For O2 and O2/N2, the values were 947 X 10-6 and 1.008. Result obtained was not at the standard values due to incompatibility of new coupling agent used, and the pair of zeolitespolymer. To produce hybrid membrane, the parameter studied, the zeolites and polymer pair and the use appropriate of coupling agent are very important.
format	Undergraduates Project Papers
author	Siti Badriah, Harun
author_facet	Siti Badriah, Harun
author_sort	Siti Badriah, Harun
title	Development of hybrid membrane (polysulfone and zeolites) for gas separation application
title_short	Development of hybrid membrane (polysulfone and zeolites) for gas separation application
title_full	Development of hybrid membrane (polysulfone and zeolites) for gas separation application
title_fullStr	Development of hybrid membrane (polysulfone and zeolites) for gas separation application
title_full_unstemmed	Development of hybrid membrane (polysulfone and zeolites) for gas separation application
title_sort	development of hybrid membrane (polysulfone and zeolites) for gas separation application
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/3425/ http://umpir.ump.edu.my/id/eprint/3425/ http://umpir.ump.edu.my/id/eprint/3425/1/CD5949_SITI_BADRIAH_BT_HARUN.pdf
first_indexed	2023-09-18T21:57:43Z
last_indexed	2023-09-18T21:57:43Z
_version_	1777414190851424256

Development of hybrid membrane (polysulfone and zeolites) for gas separation application

Similar Items