Development of round die for press brake machine
The target of this project was to design and fabricate the round die with radius 10mm. To success this project, the important things is to design the round die via Solidwork. After that, the mild steel materials were used in fabricate process based on cutting, milling, and edm wire cut. The results...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English English |
| Published: |
2012
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/2972/ http://umpir.ump.edu.my/id/eprint/2972/ http://umpir.ump.edu.my/id/eprint/2972/1/CD6117.pdf http://umpir.ump.edu.my/id/eprint/2972/2/CD6117.pdf |
| Summary: | The target of this project was to design and fabricate the round die with radius 10mm. To success this project, the important things is to design the round die via Solidwork. After that, the mild steel materials were used in fabricate process based on cutting, milling, and edm wire cut. The results show the parts can be combined with the machine. |
|---|