Treatment of MTBE in wastewater by air stripping and carbon adsorption
A study was conducted on the efficiency of the combined system for removal of the Methyl-tert-butyl ether (MTBE) from wastewater by simultaneous use of air stripping and carbon adsorption. MTBE which is widely used in industrial may cause environmental concern due to its presence in waste water. Tw...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2010
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/2680/ http://umpir.ump.edu.my/id/eprint/2680/ http://umpir.ump.edu.my/id/eprint/2680/1/MOHAMAD_NORADLI_BIN_HASHIM.PDF |
| id |
ump-2680 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-26802015-03-03T07:57:55Z http://umpir.ump.edu.my/id/eprint/2680/ Treatment of MTBE in wastewater by air stripping and carbon adsorption Mohamad Noradli, Hashim TD Environmental technology. Sanitary engineering A study was conducted on the efficiency of the combined system for removal of the Methyl-tert-butyl ether (MTBE) from wastewater by simultaneous use of air stripping and carbon adsorption. MTBE which is widely used in industrial may cause environmental concern due to its presence in waste water. Two main processes involve in this research. These processes are air stripping and carbon adsorption. Compressed air is used in air stripping process and the Granular Activated Carbon is for adsorption where adsorption of MTBE occurs on the GAC. This research is about to use combine system and remove pollutant from the wastewater, where combination of air stripping and activated carbon adsorption in remove MTBE from wastewater was analyzed. The experimental rig experiments conducted at different flow rates 4 and 6 (L/min). It conducted at different open valve time that is 30s, 40s, 50s, 60s, 120s, 180s and 240s. The highest removal for flow rate 4 is 85% at cycle time 240s and for flow rate 6 is 90% for cycle time 240s. The removal of the surfactant MTBE from water by simultaneous use of air stripping and powdered granular carbon, GAC adsorption shows better performance than other system. From this research It can be concluded that, the overall project achieve the objectives by completion. The combine system effectively removes MTBE from waste water. Hope the environmental problem also will be reduced by treat the waste water contain MTBE before it is release to natural water sources. 2010-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2680/1/MOHAMAD_NORADLI_BIN_HASHIM.PDF Mohamad Noradli, Hashim (2010) Treatment of MTBE in wastewater by air stripping and carbon adsorption. Faculty of Chemical & Natural Resources Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:56259&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TD Environmental technology. Sanitary engineering |
| spellingShingle |
TD Environmental technology. Sanitary engineering Mohamad Noradli, Hashim Treatment of MTBE in wastewater by air stripping and carbon adsorption |
| description |
A study was conducted on the efficiency of the combined system for removal of the Methyl-tert-butyl ether (MTBE) from wastewater by simultaneous use of air stripping and
carbon adsorption. MTBE which is widely used in industrial may cause environmental concern due to its presence in waste water. Two main processes involve in this research. These processes are air stripping and carbon adsorption. Compressed air is used in air stripping process and the Granular Activated Carbon is for adsorption where adsorption of MTBE occurs on the GAC. This research is about to use combine system and remove pollutant from the wastewater, where combination of air stripping and activated carbon adsorption in remove MTBE from wastewater was analyzed. The experimental rig experiments conducted at different flow rates 4 and 6 (L/min). It conducted at different open valve time that is 30s, 40s, 50s, 60s, 120s, 180s and 240s. The highest removal for flow rate 4 is 85% at cycle time 240s and for flow rate 6 is 90% for cycle time 240s. The removal of the surfactant MTBE from water by simultaneous use of air stripping and powdered granular carbon, GAC adsorption shows better performance than other system. From this research It can be concluded that, the overall project achieve the objectives by
completion. The combine system effectively removes MTBE from waste water. Hope the environmental problem also will be reduced by treat the waste water contain MTBE before it is release to natural water sources. |
| format |
Undergraduates Project Papers |
| author |
Mohamad Noradli, Hashim |
| author_facet |
Mohamad Noradli, Hashim |
| author_sort |
Mohamad Noradli, Hashim |
| title |
Treatment of MTBE in wastewater by air stripping and carbon adsorption |
| title_short |
Treatment of MTBE in wastewater by air stripping and carbon adsorption |
| title_full |
Treatment of MTBE in wastewater by air stripping and carbon adsorption |
| title_fullStr |
Treatment of MTBE in wastewater by air stripping and carbon adsorption |
| title_full_unstemmed |
Treatment of MTBE in wastewater by air stripping and carbon adsorption |
| title_sort |
treatment of mtbe in wastewater by air stripping and carbon adsorption |
| publishDate |
2010 |
| url |
http://umpir.ump.edu.my/id/eprint/2680/ http://umpir.ump.edu.my/id/eprint/2680/ http://umpir.ump.edu.my/id/eprint/2680/1/MOHAMAD_NORADLI_BIN_HASHIM.PDF |
| first_indexed |
2023-09-18T21:56:43Z |
| last_indexed |
2023-09-18T21:56:43Z |
| _version_ |
1777414128216834048 |