Low insertion loss of surface mount device low pass filter at 700 MHz

The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding an...

Full description

Bibliographic Details
Main Authors:	Khairil Anuar, Khairi, Mohd Faizal, Jamlos, Surentiran, Padmanathan, Mohd Aminudin, Jamlos, Muammar, Mohamad Isa
Format:	Article
Language:	English
Published:	IAES 2019
Subjects:	TJ Mechanical engineering and machinery TK Electrical engineering. Electronics Nuclear engineering
Online Access:	http://umpir.ump.edu.my/id/eprint/26188/ http://umpir.ump.edu.my/id/eprint/26188/ http://umpir.ump.edu.my/id/eprint/26188/ http://umpir.ump.edu.my/id/eprint/26188/1/Low%20insertion%20loss%20of%20surface%20mount%20device%20low.pdf

id	ump-26188
recordtype	eprints
spelling	ump-261882019-12-06T08:57:00Z http://umpir.ump.edu.my/id/eprint/26188/ Low insertion loss of surface mount device low pass filter at 700 MHz Khairil Anuar, Khairi Mohd Faizal, Jamlos Surentiran, Padmanathan Mohd Aminudin, Jamlos Muammar, Mohamad Isa TJ Mechanical engineering and machinery TK Electrical engineering. Electronics Nuclear engineering The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency. IAES 2019-06 Article PeerReviewed pdf en cc_by_nc_4 http://umpir.ump.edu.my/id/eprint/26188/1/Low%20insertion%20loss%20of%20surface%20mount%20device%20low.pdf Khairil Anuar, Khairi and Mohd Faizal, Jamlos and Surentiran, Padmanathan and Mohd Aminudin, Jamlos and Muammar, Mohamad Isa (2019) Low insertion loss of surface mount device low pass filter at 700 MHz. Bulletin of Electrical Engineering and Informatics, 8 (2). pp. 382-388. ISSN 2302-9285 https://doi.org/10.11591/eei.v8i2.1386 https://doi.org/10.11591/eei.v8i2.1386
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery TK Electrical engineering. Electronics Nuclear engineering
spellingShingle	TJ Mechanical engineering and machinery TK Electrical engineering. Electronics Nuclear engineering Khairil Anuar, Khairi Mohd Faizal, Jamlos Surentiran, Padmanathan Mohd Aminudin, Jamlos Muammar, Mohamad Isa Low insertion loss of surface mount device low pass filter at 700 MHz
description	The paper involved with the design, simulation and fabrication of 6th order elliptical-based Surface Mount Device (SMD) LPF with cutoff frequency at 700 MHz. Fabricated LPF is consisted of four PCB layers which components of SMD are soldered on the top layer. Another three layers is for grounding and shielding, power supply and grounding void. The four layers is crucial to avoid interference between components. The research has find out that the momentum simulation is definitely required to improve the signals response compared to a normal simulation by ADS software. The comparison between momentum simulated versus measured and normal simulated versus measured is 0.2 dB and 29 dB correspondingly. Such huge difference leads to conclusion that momentum simulation is saving time without having much struggles and efforts to get optimum readings. The Proposed SMD LPF has a very low insertion loss of 0.965dB with a transition region of 195 MHz which is good steepness to avoid any image frequency.
format	Article
author	Khairil Anuar, Khairi Mohd Faizal, Jamlos Surentiran, Padmanathan Mohd Aminudin, Jamlos Muammar, Mohamad Isa
author_facet	Khairil Anuar, Khairi Mohd Faizal, Jamlos Surentiran, Padmanathan Mohd Aminudin, Jamlos Muammar, Mohamad Isa
author_sort	Khairil Anuar, Khairi
title	Low insertion loss of surface mount device low pass filter at 700 MHz
title_short	Low insertion loss of surface mount device low pass filter at 700 MHz
title_full	Low insertion loss of surface mount device low pass filter at 700 MHz
title_fullStr	Low insertion loss of surface mount device low pass filter at 700 MHz
title_full_unstemmed	Low insertion loss of surface mount device low pass filter at 700 MHz
title_sort	low insertion loss of surface mount device low pass filter at 700 mhz
publisher	IAES
publishDate	2019
url	http://umpir.ump.edu.my/id/eprint/26188/ http://umpir.ump.edu.my/id/eprint/26188/ http://umpir.ump.edu.my/id/eprint/26188/ http://umpir.ump.edu.my/id/eprint/26188/1/Low%20insertion%20loss%20of%20surface%20mount%20device%20low.pdf
first_indexed	2023-09-18T22:40:38Z
last_indexed	2023-09-18T22:40:38Z
_version_	1777416890523582464

Low insertion loss of surface mount device low pass filter at 700 MHz

Similar Items