Effect of surface roughness using different electrodes on electrical discharge machining

The electrical discharge machining (EDM), is one of the processing based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. The objective of the project is to p...

Full description

Bibliographic Details
Main Author:	Mohd Abd Latif, Abd Ghani
Format:	Undergraduates Project Papers
Language:	English
Published:	2008
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/245/ http://umpir.ump.edu.my/id/eprint/245/ http://umpir.ump.edu.my/id/eprint/245/1/3587.pdf

id	ump-245
recordtype	eprints
spelling	ump-2452015-03-03T06:16:01Z http://umpir.ump.edu.my/id/eprint/245/ Effect of surface roughness using different electrodes on electrical discharge machining Mohd Abd Latif, Abd Ghani TA Engineering (General). Civil engineering (General) The electrical discharge machining (EDM), is one of the processing based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. The objective of the project is to predict the surface roughness on the workpiece using different electrode such copper, aluminum and brass. There must be a different on surface roughness produce in tool steel workpiece. Results obtained from this study will be compared among each other and similar studies in the literature. The problem of this project is to predict the best electrode among copper, brass and aluminum electros that can give the smoothes surface roughness on the tool steel workpiece. The problem face in this project is to choose and set the parameters before running the experiment. The EDM parameters such as current, pulse on-time, pulse off-time, arc voltage, also can affect the Ra, surface roughness on the workpiece. This is because the parameters are different between the electrodes each electrode has their own characteristics. The tool steel workpiece is machined by EDM using copper, brass, and aluminum electrodes. After machining, the workpiece will be measured using perthometer. Data collected will be analyzed before deciding the best electrode. The best electrode for the EDM between copper, aluminum, and brass is copper electrodes. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/245/1/3587.pdf Mohd Abd Latif, Abd Ghani (2008) Effect of surface roughness using different electrodes on electrical discharge machining. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:42845&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Mohd Abd Latif, Abd Ghani Effect of surface roughness using different electrodes on electrical discharge machining
description	The electrical discharge machining (EDM), is one of the processing based on non-traditional manufacturing procedures, is gaining increased popularity, since it does not require cutting tools and allows machining involving hard, brittle, thin and complex geometry. The objective of the project is to predict the surface roughness on the workpiece using different electrode such copper, aluminum and brass. There must be a different on surface roughness produce in tool steel workpiece. Results obtained from this study will be compared among each other and similar studies in the literature. The problem of this project is to predict the best electrode among copper, brass and aluminum electros that can give the smoothes surface roughness on the tool steel workpiece. The problem face in this project is to choose and set the parameters before running the experiment. The EDM parameters such as current, pulse on-time, pulse off-time, arc voltage, also can affect the Ra, surface roughness on the workpiece. This is because the parameters are different between the electrodes each electrode has their own characteristics. The tool steel workpiece is machined by EDM using copper, brass, and aluminum electrodes. After machining, the workpiece will be measured using perthometer. Data collected will be analyzed before deciding the best electrode. The best electrode for the EDM between copper, aluminum, and brass is copper electrodes.
format	Undergraduates Project Papers
author	Mohd Abd Latif, Abd Ghani
author_facet	Mohd Abd Latif, Abd Ghani
author_sort	Mohd Abd Latif, Abd Ghani
title	Effect of surface roughness using different electrodes on electrical discharge machining
title_short	Effect of surface roughness using different electrodes on electrical discharge machining
title_full	Effect of surface roughness using different electrodes on electrical discharge machining
title_fullStr	Effect of surface roughness using different electrodes on electrical discharge machining
title_full_unstemmed	Effect of surface roughness using different electrodes on electrical discharge machining
title_sort	effect of surface roughness using different electrodes on electrical discharge machining
publishDate	2008
url	http://umpir.ump.edu.my/id/eprint/245/ http://umpir.ump.edu.my/id/eprint/245/ http://umpir.ump.edu.my/id/eprint/245/1/3587.pdf
first_indexed	2023-09-18T21:52:14Z
last_indexed	2023-09-18T21:52:14Z
_version_	1777413845525987328

Effect of surface roughness using different electrodes on electrical discharge machining

Similar Items