Public sewage wastewater treatment by using electrocoagulation process

Sewage wastewater is polluted and it can be treated by using the method of electrocoagulation process. The electrocoagulation process is one of the methods to clean the sewage wasteWater. Sewage wastewater characteristic can be divided into three major categories which are physical, chemical, biolo...

Full description

Bibliographic Details
Main Author:	Noor Suwaibah, Hamdan
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TD Environmental technology. Sanitary engineering
Online Access:	http://umpir.ump.edu.my/id/eprint/2428/ http://umpir.ump.edu.my/id/eprint/2428/ http://umpir.ump.edu.my/id/eprint/2428/1/NOOR__SUWAIBAH_BINTI_HAMDAN.PDF

id	ump-2428
recordtype	eprints
spelling	ump-24282015-03-03T07:56:32Z http://umpir.ump.edu.my/id/eprint/2428/ Public sewage wastewater treatment by using electrocoagulation process Noor Suwaibah, Hamdan TD Environmental technology. Sanitary engineering Sewage wastewater is polluted and it can be treated by using the method of electrocoagulation process. The electrocoagulation process is one of the methods to clean the sewage wasteWater. Sewage wastewater characteristic can be divided into three major categories which are physical, chemical, biological, and chemical The primary objective of this study are to characterize the sewage waste water properties in terms of the BOD COD, SS and the pH affluence before and after the sample is being treated by the electrocoagulation process and to determine the effect of ampere through the process and the sewerage properties that involve. There are five parameter experiments that has been done to determine the quality of the effluent which are biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solid (SS), pH and the gases that produce. From the experiment, the reading of the BOD, COD, SS, pH and gases are within the as stated in table 4.1 42, and 4.3. Based on the results the sewage wastewater quality is compare according to the standard that stated in the Environmental Quality Act (Sewage and Industrial Effluents) Regulations 1979, Maximum Effluent Parameter Limit Standard A and B as stated in appendix A. The sewage wastewater condition result after treated was filling up the standard which is fixed by and the result was based on the ampere effect through the electrocoagulation process to the sewage wastewater, This is show that the sewage wastewater can be treated by using the electrocoagulation process. 2010-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2428/1/NOOR__SUWAIBAH_BINTI_HAMDAN.PDF Noor Suwaibah, Hamdan (2010) Public sewage wastewater treatment by using electrocoagulation process. Faculty of Civil Engineering & Earth Resources, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:52543&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TD Environmental technology. Sanitary engineering
spellingShingle	TD Environmental technology. Sanitary engineering Noor Suwaibah, Hamdan Public sewage wastewater treatment by using electrocoagulation process
description	Sewage wastewater is polluted and it can be treated by using the method of electrocoagulation process. The electrocoagulation process is one of the methods to clean the sewage wasteWater. Sewage wastewater characteristic can be divided into three major categories which are physical, chemical, biological, and chemical The primary objective of this study are to characterize the sewage waste water properties in terms of the BOD COD, SS and the pH affluence before and after the sample is being treated by the electrocoagulation process and to determine the effect of ampere through the process and the sewerage properties that involve. There are five parameter experiments that has been done to determine the quality of the effluent which are biochemical oxygen demand (BOD), chemical oxygen demand (COD), suspended solid (SS), pH and the gases that produce. From the experiment, the reading of the BOD, COD, SS, pH and gases are within the as stated in table 4.1 42, and 4.3. Based on the results the sewage wastewater quality is compare according to the standard that stated in the Environmental Quality Act (Sewage and Industrial Effluents) Regulations 1979, Maximum Effluent Parameter Limit Standard A and B as stated in appendix A. The sewage wastewater condition result after treated was filling up the standard which is fixed by and the result was based on the ampere effect through the electrocoagulation process to the sewage wastewater, This is show that the sewage wastewater can be treated by using the electrocoagulation process.
format	Undergraduates Project Papers
author	Noor Suwaibah, Hamdan
author_facet	Noor Suwaibah, Hamdan
author_sort	Noor Suwaibah, Hamdan
title	Public sewage wastewater treatment by using electrocoagulation process
title_short	Public sewage wastewater treatment by using electrocoagulation process
title_full	Public sewage wastewater treatment by using electrocoagulation process
title_fullStr	Public sewage wastewater treatment by using electrocoagulation process
title_full_unstemmed	Public sewage wastewater treatment by using electrocoagulation process
title_sort	public sewage wastewater treatment by using electrocoagulation process
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/2428/ http://umpir.ump.edu.my/id/eprint/2428/ http://umpir.ump.edu.my/id/eprint/2428/1/NOOR__SUWAIBAH_BINTI_HAMDAN.PDF
first_indexed	2023-09-18T21:56:12Z
last_indexed	2023-09-18T21:56:12Z
_version_	1777414095834710016

Public sewage wastewater treatment by using electrocoagulation process

Similar Items