Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel

This paper attempts to compare and contrast cryogenic treated and untreated carbide cutting tool in turning operation of AISI304 steel. Machining parameters, namely cutting speed, feed rate and depth of cut are optimized for cryogenic treated tools. Tool life of the insert was determined...

Full description

Bibliographic Details
Main Authors:	Patil, Nagraj, K., Gopalakrishna, B., Sangmesh, Sudhakar, K., Vijayakumar, G. C.
Format:	Article
Language:	English
Published:	Penerbit Universiti Malaysia Pahang 2018
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/23902/ http://umpir.ump.edu.my/id/eprint/23902/ http://umpir.ump.edu.my/id/eprint/23902/ http://umpir.ump.edu.my/id/eprint/23902/1/Performance%20studies%20on%20cryogenic%20treated%20carbide%20cutting.pdf

id	ump-23902
recordtype	eprints
spelling	ump-239022019-01-22T07:33:12Z http://umpir.ump.edu.my/id/eprint/23902/ Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel Patil, Nagraj K., Gopalakrishna B., Sangmesh Sudhakar, K. Vijayakumar, G. C. TJ Mechanical engineering and machinery This paper attempts to compare and contrast cryogenic treated and untreated carbide cutting tool in turning operation of AISI304 steel. Machining parameters, namely cutting speed, feed rate and depth of cut are optimized for cryogenic treated tools. Tool life of the insert was determined based on the tests performed such as hardness, surface roughness and maximum wear. A design of experiments (DOE) and an analysis of variance (ANOVA) have been incorporated in the study. The objective of the paper is to determine the effects of each parameter on the surface roughness and tool wear. Material characterization was carried out using scanning electron microscope (SEM) and the maximum wear was estimated using optical microscope before and after the cryogenic treatment. The experimental results showed that cryogenic treated cutting tools significantly reduction in surface roughness, improves resistance to wear than untreated one. A confirmation test was performed between experimental and optimum values and the results are found to be in good agreement. Penerbit Universiti Malaysia Pahang 2018 Article PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/23902/1/Performance%20studies%20on%20cryogenic%20treated%20carbide%20cutting.pdf Patil, Nagraj and K., Gopalakrishna and B., Sangmesh and Sudhakar, K. and Vijayakumar, G. C. (2018) Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel. Journal of Mechanical Engineering and Sciences (JMES), 12 (3). pp. 3927-3941. ISSN 2289-4659 (print); 2231-8380 (online) https://doi.org/10.15282/jmes.12.3.2018.12.0343 https://doi.org/10.15282/jmes.12.3.2018.12.0343
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Patil, Nagraj K., Gopalakrishna B., Sangmesh Sudhakar, K. Vijayakumar, G. C. Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
description	This paper attempts to compare and contrast cryogenic treated and untreated carbide cutting tool in turning operation of AISI304 steel. Machining parameters, namely cutting speed, feed rate and depth of cut are optimized for cryogenic treated tools. Tool life of the insert was determined based on the tests performed such as hardness, surface roughness and maximum wear. A design of experiments (DOE) and an analysis of variance (ANOVA) have been incorporated in the study. The objective of the paper is to determine the effects of each parameter on the surface roughness and tool wear. Material characterization was carried out using scanning electron microscope (SEM) and the maximum wear was estimated using optical microscope before and after the cryogenic treatment. The experimental results showed that cryogenic treated cutting tools significantly reduction in surface roughness, improves resistance to wear than untreated one. A confirmation test was performed between experimental and optimum values and the results are found to be in good agreement.
format	Article
author	Patil, Nagraj K., Gopalakrishna B., Sangmesh Sudhakar, K. Vijayakumar, G. C.
author_facet	Patil, Nagraj K., Gopalakrishna B., Sangmesh Sudhakar, K. Vijayakumar, G. C.
author_sort	Patil, Nagraj
title	Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
title_short	Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
title_full	Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
title_fullStr	Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
title_full_unstemmed	Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel
title_sort	performance studies on cryogenic treated carbide cutting tool for turning of aisi304 steel
publisher	Penerbit Universiti Malaysia Pahang
publishDate	2018
url	http://umpir.ump.edu.my/id/eprint/23902/ http://umpir.ump.edu.my/id/eprint/23902/ http://umpir.ump.edu.my/id/eprint/23902/ http://umpir.ump.edu.my/id/eprint/23902/1/Performance%20studies%20on%20cryogenic%20treated%20carbide%20cutting.pdf
first_indexed	2023-09-18T22:36:00Z
last_indexed	2023-09-18T22:36:00Z
_version_	1777416599839440896

Performance studies on cryogenic treated carbide cutting tool for turning of AISI304 steel

Similar Items