Carbon Dioxide (CO2) laser cut quality of acrylic

This thesis presents the study of Acrylic were cut on CO2 laser cutting system and analyze the effects of power on cut quality. There are 2 cut quality involved during this thesis which are surface roughness and kerf width. Manual calculation analysis was used to investigate the effect of power on l...

Full description

Bibliographic Details
Main Author:	Ahmad Shazwi, Kamaruzaman
Format:	Undergraduates Project Papers
Language:	English English English English
Published:	2008
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/233/ http://umpir.ump.edu.my/id/eprint/233/ http://umpir.ump.edu.my/id/eprint/233/1/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Table%20of%20content.pdf http://umpir.ump.edu.my/id/eprint/233/2/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Abstract.pdf http://umpir.ump.edu.my/id/eprint/233/3/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Chapter%201.pdf http://umpir.ump.edu.my/id/eprint/233/5/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20References.pdf

id	ump-233
recordtype	eprints
spelling	ump-2332017-04-10T04:11:16Z http://umpir.ump.edu.my/id/eprint/233/ Carbon Dioxide (CO2) laser cut quality of acrylic Ahmad Shazwi, Kamaruzaman TJ Mechanical engineering and machinery This thesis presents the study of Acrylic were cut on CO2 laser cutting system and analyze the effects of power on cut quality. There are 2 cut quality involved during this thesis which are surface roughness and kerf width. Manual calculation analysis was used to investigate the effect of power on laser cut quality. The cutting process was implemented at apply power start from 15 – 28.5 W and 10 experiments were conduct during this thesis work. The feed rate will remain as constant variable parameter during this work study. Perthometer and image analyzer are conducted to examine the cut quality. From the analysis done, it was shown that the kerf width and surface roughness depends mainly on the laser power intensity. Power has great significance parameter in terms of improving productivity and good surface finish. As obtained through this thesis study, increasing the power intensity resulted in smaller value of surface roughness, Ra and higher value of kerf width. 2008-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/233/1/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Table%20of%20content.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/233/2/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Abstract.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/233/3/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Chapter%201.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/233/5/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20References.pdf Ahmad Shazwi, Kamaruzaman (2008) Carbon Dioxide (CO2) laser cut quality of acrylic. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:40007&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English English English English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Ahmad Shazwi, Kamaruzaman Carbon Dioxide (CO2) laser cut quality of acrylic
description	This thesis presents the study of Acrylic were cut on CO2 laser cutting system and analyze the effects of power on cut quality. There are 2 cut quality involved during this thesis which are surface roughness and kerf width. Manual calculation analysis was used to investigate the effect of power on laser cut quality. The cutting process was implemented at apply power start from 15 – 28.5 W and 10 experiments were conduct during this thesis work. The feed rate will remain as constant variable parameter during this work study. Perthometer and image analyzer are conducted to examine the cut quality. From the analysis done, it was shown that the kerf width and surface roughness depends mainly on the laser power intensity. Power has great significance parameter in terms of improving productivity and good surface finish. As obtained through this thesis study, increasing the power intensity resulted in smaller value of surface roughness, Ra and higher value of kerf width.
format	Undergraduates Project Papers
author	Ahmad Shazwi, Kamaruzaman
author_facet	Ahmad Shazwi, Kamaruzaman
author_sort	Ahmad Shazwi, Kamaruzaman
title	Carbon Dioxide (CO2) laser cut quality of acrylic
title_short	Carbon Dioxide (CO2) laser cut quality of acrylic
title_full	Carbon Dioxide (CO2) laser cut quality of acrylic
title_fullStr	Carbon Dioxide (CO2) laser cut quality of acrylic
title_full_unstemmed	Carbon Dioxide (CO2) laser cut quality of acrylic
title_sort	carbon dioxide (co2) laser cut quality of acrylic
publishDate	2008
url	http://umpir.ump.edu.my/id/eprint/233/ http://umpir.ump.edu.my/id/eprint/233/ http://umpir.ump.edu.my/id/eprint/233/1/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Table%20of%20content.pdf http://umpir.ump.edu.my/id/eprint/233/2/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Abstract.pdf http://umpir.ump.edu.my/id/eprint/233/3/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20Chapter%201.pdf http://umpir.ump.edu.my/id/eprint/233/5/Carbon%20Dioxide%20%28CO2%29%20laser%20cut%20quality%20of%20acrylic%20-%20References.pdf
first_indexed	2023-09-18T21:52:12Z
last_indexed	2023-09-18T21:52:12Z
_version_	1777413843766476800

Carbon Dioxide (CO2) laser cut quality of acrylic

Similar Items