Design, analysis and fabrication of bottle neck elactrode

Bottle mould making technology has become one of the most important industries nowadays. However, the bottle necks mould making process is given less attention and special tooling is needed in order to shape the mould. Bottle neck tool making process involves features consideration of its complex ge...

Full description

Bibliographic Details
Main Author:	Ngau, Kien Keong
Format:	Undergraduates Project Papers
Language:	English
Published:	2007
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/2328/ http://umpir.ump.edu.my/id/eprint/2328/ http://umpir.ump.edu.my/id/eprint/2328/1/NGAU_KIEN_KEONG.PDF

id	ump-2328
recordtype	eprints
spelling	ump-23282015-03-03T07:55:57Z http://umpir.ump.edu.my/id/eprint/2328/ Design, analysis and fabrication of bottle neck elactrode Ngau, Kien Keong TJ Mechanical engineering and machinery Bottle mould making technology has become one of the most important industries nowadays. However, the bottle necks mould making process is given less attention and special tooling is needed in order to shape the mould. Bottle neck tool making process involves features consideration of its complex geometry. This project is aim to design and manufacture the bottle neck tool. This tool will be use to form a shape the workpiece to become bottle neck mould. For that, the tool design was done using Solidworks and Cimatron. The FEA method was used in electrostatic current and voltage analysis on the tool. Finally, the DFM Concurrent Costing was applied to estimate the machining cost before it proceeds into the machining stages. The results show that after FEA analysis, the values of the electrical current magnitude were stated as 1 936.07A/m2 (highest) and 11.1 649A/m2 (lowest) respectively. Meanwhile, the estimated machining cost generated from DFM software was RM 867.19. A prototype of the neck finish electrode was fabricated at the end of this project. As a conclusion, the electrode design, analysis and fabrication have achieved by using tools such as Solidworks, Cimairon, ALGOR, DFM Concurrent Costing and MasterCAM. 2007-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2328/1/NGAU_KIEN_KEONG.PDF Ngau, Kien Keong (2007) Design, analysis and fabrication of bottle neck elactrode. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:39660&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Ngau, Kien Keong Design, analysis and fabrication of bottle neck elactrode
description	Bottle mould making technology has become one of the most important industries nowadays. However, the bottle necks mould making process is given less attention and special tooling is needed in order to shape the mould. Bottle neck tool making process involves features consideration of its complex geometry. This project is aim to design and manufacture the bottle neck tool. This tool will be use to form a shape the workpiece to become bottle neck mould. For that, the tool design was done using Solidworks and Cimatron. The FEA method was used in electrostatic current and voltage analysis on the tool. Finally, the DFM Concurrent Costing was applied to estimate the machining cost before it proceeds into the machining stages. The results show that after FEA analysis, the values of the electrical current magnitude were stated as 1 936.07A/m2 (highest) and 11.1 649A/m2 (lowest) respectively. Meanwhile, the estimated machining cost generated from DFM software was RM 867.19. A prototype of the neck finish electrode was fabricated at the end of this project. As a conclusion, the electrode design, analysis and fabrication have achieved by using tools such as Solidworks, Cimairon, ALGOR, DFM Concurrent Costing and MasterCAM.
format	Undergraduates Project Papers
author	Ngau, Kien Keong
author_facet	Ngau, Kien Keong
author_sort	Ngau, Kien Keong
title	Design, analysis and fabrication of bottle neck elactrode
title_short	Design, analysis and fabrication of bottle neck elactrode
title_full	Design, analysis and fabrication of bottle neck elactrode
title_fullStr	Design, analysis and fabrication of bottle neck elactrode
title_full_unstemmed	Design, analysis and fabrication of bottle neck elactrode
title_sort	design, analysis and fabrication of bottle neck elactrode
publishDate	2007
url	http://umpir.ump.edu.my/id/eprint/2328/ http://umpir.ump.edu.my/id/eprint/2328/ http://umpir.ump.edu.my/id/eprint/2328/1/NGAU_KIEN_KEONG.PDF
first_indexed	2023-09-18T21:56:02Z
last_indexed	2023-09-18T21:56:02Z
_version_	1777414084536303616

Design, analysis and fabrication of bottle neck elactrode

Similar Items