Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process

Improvement of the robustness of hydrophobic surfaces is crucial to achieving commercial applications of these surfaces in such various areas as self-cleaning, water repellency and corrosion resistance. Compressed oil palm trunk (OPT) panel is one of potential product which can be used as panelling...

Full description

Bibliographic Details
Main Authors:	Syafiqah, Muzakir, Nurjannah, Salim, Nurul Huda, Abu Bakar, Rasidi, Roslan, Lim, Wan Sin, Rokiah, Hashim
Format:	Conference or Workshop Item
Language:	English
Published:	IOP Publishing 2018
Subjects:	T Technology (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/23133/ http://umpir.ump.edu.my/id/eprint/23133/ http://umpir.ump.edu.my/id/eprint/23133/7/Fabrication%20of%20hydrophobic%20compressed%20oil%20palm%20trunk.pdf

id	ump-23133
recordtype	eprints
spelling	ump-231332019-07-08T03:36:26Z http://umpir.ump.edu.my/id/eprint/23133/ Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process Syafiqah, Muzakir Nurjannah, Salim Nurul Huda, Abu Bakar Rasidi, Roslan Lim, Wan Sin Rokiah, Hashim T Technology (General) Improvement of the robustness of hydrophobic surfaces is crucial to achieving commercial applications of these surfaces in such various areas as self-cleaning, water repellency and corrosion resistance. Compressed oil palm trunk (OPT) panel is one of potential product which can be used as panelling and indoor furniture application. By adding hydrophobic properties to compressed oil palm trunk panel might increase the application of compressed oil palm trunk especially for outdoor application. In this study, fabrication is using the sol-gel technique. Sol-gel was prepared by adding ethanol with Hexadecyl Trimethyl Ammonium Bromide (CTAB) solution with Tetraethyl Orthosilicate (TEOS) with surface modification of chlorotrimethylsilane (CTMS). The surface with hydrophobic coating was undergone surface analysis with contact angle machine with the aid of software SCA 20 and the determined of the morphology of surface with scanning electron microscope (SEM). The produced compressed oil palm trunk surfaces exhibited promising hydrophobic properties with a contact angle of 104° and the relatively better mechanical robustness. IOP Publishing 2018 Conference or Workshop Item PeerReviewed pdf en cc_by http://umpir.ump.edu.my/id/eprint/23133/7/Fabrication%20of%20hydrophobic%20compressed%20oil%20palm%20trunk.pdf Syafiqah, Muzakir and Nurjannah, Salim and Nurul Huda, Abu Bakar and Rasidi, Roslan and Lim, Wan Sin and Rokiah, Hashim (2018) Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process. In: IOP Conference Series: Materials Science and Engineering, International Conference on Innovative Technology, Engineering and Sciences 2018 (iCITES 2018), 1-2 March 2018 , Universiti Malaysia Pahang (UMP) Pekan Campus Library, Malaysia. pp. 1-7., 342 (012043). ISSN 1757-8981 https://doi.org/10.1088/1757-899X/342/1/012043
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	T Technology (General)
spellingShingle	T Technology (General) Syafiqah, Muzakir Nurjannah, Salim Nurul Huda, Abu Bakar Rasidi, Roslan Lim, Wan Sin Rokiah, Hashim Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
description	Improvement of the robustness of hydrophobic surfaces is crucial to achieving commercial applications of these surfaces in such various areas as self-cleaning, water repellency and corrosion resistance. Compressed oil palm trunk (OPT) panel is one of potential product which can be used as panelling and indoor furniture application. By adding hydrophobic properties to compressed oil palm trunk panel might increase the application of compressed oil palm trunk especially for outdoor application. In this study, fabrication is using the sol-gel technique. Sol-gel was prepared by adding ethanol with Hexadecyl Trimethyl Ammonium Bromide (CTAB) solution with Tetraethyl Orthosilicate (TEOS) with surface modification of chlorotrimethylsilane (CTMS). The surface with hydrophobic coating was undergone surface analysis with contact angle machine with the aid of software SCA 20 and the determined of the morphology of surface with scanning electron microscope (SEM). The produced compressed oil palm trunk surfaces exhibited promising hydrophobic properties with a contact angle of 104° and the relatively better mechanical robustness.
format	Conference or Workshop Item
author	Syafiqah, Muzakir Nurjannah, Salim Nurul Huda, Abu Bakar Rasidi, Roslan Lim, Wan Sin Rokiah, Hashim
author_facet	Syafiqah, Muzakir Nurjannah, Salim Nurul Huda, Abu Bakar Rasidi, Roslan Lim, Wan Sin Rokiah, Hashim
author_sort	Syafiqah, Muzakir
title	Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
title_short	Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
title_full	Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
title_fullStr	Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
title_full_unstemmed	Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
title_sort	fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process
publisher	IOP Publishing
publishDate	2018
url	http://umpir.ump.edu.my/id/eprint/23133/ http://umpir.ump.edu.my/id/eprint/23133/ http://umpir.ump.edu.my/id/eprint/23133/7/Fabrication%20of%20hydrophobic%20compressed%20oil%20palm%20trunk.pdf
first_indexed	2023-09-18T22:34:33Z
last_indexed	2023-09-18T22:34:33Z
_version_	1777416507962163200

Fabrication of hydrophobic compressed oil palm trunk surface by sol-gel process

Similar Items