A case study on manufacturing waste reduction through just in time

The waste reduction through JIT concept that can reduce cycle time is difficulty to find a good solution. However after make solution of this project and discuss with engineer have many constraint that cannot apply in reduce cycle time. In classify the waste that occur in production line of product...

Full description

Bibliographic Details
Main Author:	Mohd Rozaimi, Arshad
Format:	Undergraduates Project Papers
Language:	English
Published:	2007
Subjects:	TD Environmental technology. Sanitary engineering
Online Access:	http://umpir.ump.edu.my/id/eprint/2304/ http://umpir.ump.edu.my/id/eprint/2304/ http://umpir.ump.edu.my/id/eprint/2304/1/MOHD_ROZAIMI_BIN_ARSHAD.PDF

id	ump-2304
recordtype	eprints
spelling	ump-23042015-03-03T07:55:49Z http://umpir.ump.edu.my/id/eprint/2304/ A case study on manufacturing waste reduction through just in time Mohd Rozaimi, Arshad TD Environmental technology. Sanitary engineering The waste reduction through JIT concept that can reduce cycle time is difficulty to find a good solution. However after make solution of this project and discuss with engineer have many constraint that cannot apply in reduce cycle time. In classify the waste that occur in production line of product 4900-X-319 is successful. This product have about 5 types of waste is defect product, motion, transportation, processing and waiting time. To collect this information some observation has to do and discuss with engineer. The cycle time from this product have to collect using stopwatch. The data have to measure at least 3 times because in engineering the accurate data is important. While collect the data each process of this product has to understand and this will give idea to provide a solution about reducing cycle time. After that make line balancing of 4900-X-319 and the total time to produce this product is 5.33minlpiece. To achieve last objective several solution have to discuss with engineer. The result of the solution has be reject because many constraint from factory that can implement in this product. If this solution acceptable the cycle time will reduce about 24s and can reduce operator cost. 2007-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/2304/1/MOHD_ROZAIMI_BIN_ARSHAD.PDF Mohd Rozaimi, Arshad (2007) A case study on manufacturing waste reduction through just in time. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:31062&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TD Environmental technology. Sanitary engineering
spellingShingle	TD Environmental technology. Sanitary engineering Mohd Rozaimi, Arshad A case study on manufacturing waste reduction through just in time
description	The waste reduction through JIT concept that can reduce cycle time is difficulty to find a good solution. However after make solution of this project and discuss with engineer have many constraint that cannot apply in reduce cycle time. In classify the waste that occur in production line of product 4900-X-319 is successful. This product have about 5 types of waste is defect product, motion, transportation, processing and waiting time. To collect this information some observation has to do and discuss with engineer. The cycle time from this product have to collect using stopwatch. The data have to measure at least 3 times because in engineering the accurate data is important. While collect the data each process of this product has to understand and this will give idea to provide a solution about reducing cycle time. After that make line balancing of 4900-X-319 and the total time to produce this product is 5.33minlpiece. To achieve last objective several solution have to discuss with engineer. The result of the solution has be reject because many constraint from factory that can implement in this product. If this solution acceptable the cycle time will reduce about 24s and can reduce operator cost.
format	Undergraduates Project Papers
author	Mohd Rozaimi, Arshad
author_facet	Mohd Rozaimi, Arshad
author_sort	Mohd Rozaimi, Arshad
title	A case study on manufacturing waste reduction through just in time
title_short	A case study on manufacturing waste reduction through just in time
title_full	A case study on manufacturing waste reduction through just in time
title_fullStr	A case study on manufacturing waste reduction through just in time
title_full_unstemmed	A case study on manufacturing waste reduction through just in time
title_sort	case study on manufacturing waste reduction through just in time
publishDate	2007
url	http://umpir.ump.edu.my/id/eprint/2304/ http://umpir.ump.edu.my/id/eprint/2304/ http://umpir.ump.edu.my/id/eprint/2304/1/MOHD_ROZAIMI_BIN_ARSHAD.PDF
first_indexed	2023-09-18T21:55:59Z
last_indexed	2023-09-18T21:55:59Z
_version_	1777414081636990976

A case study on manufacturing waste reduction through just in time

Similar Items