Fabrication of PSS/PDADMAC polyelectrolyte membrane via layer-by-layer (LbL) technique for forward osmosis (FO) application
In this study, FO membrane was fabricated by Layer-by-Layer (LbL) coating technique using Poly (sodium 4-styrene-sulfonate)(PSS) and Poly (diallyl-dimethylammoniumchloride) (PDADMAC) as the active polyelectrolytes. Different concentrations of polyelectrolytes and deposition time of polyelectrolytes...
| Main Authors: | , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English English English |
| Published: |
Trans Tech Publications, Switzerland
2018
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/22343/ http://umpir.ump.edu.my/id/eprint/22343/ http://umpir.ump.edu.my/id/eprint/22343/1/18.%20Fabrication%20of%20PSS%20-%20PDADMAC%20polyelectrolyte%20membrane.pdf http://umpir.ump.edu.my/id/eprint/22343/2/18.1%20Fabrication%20of%20PSS%20-%20PDADMAC%20polyelectrolyte%20membrane.pdf http://umpir.ump.edu.my/id/eprint/22343/13/Dr.%20Mazrul.pdf |
| Summary: | In this study, FO membrane was fabricated by Layer-by-Layer (LbL) coating technique using Poly (sodium 4-styrene-sulfonate)(PSS) and Poly (diallyl-dimethylammoniumchloride) (PDADMAC) as the active polyelectrolytes. Different concentrations of polyelectrolytes and deposition time of polyelectrolytes were investigated. The success of the coated layer was confirmed using ATR-FTIR and FESEM images. The membrane performance was determined by water flux and reverse solute diffusion (RSD) using pure water and 1.75M Na2SO4 as feed and draw solution, respectively. It was observed that the highest water flux, 6.76 L/m2∙h was recorded at the lowest polyelectrolytes concentration and longer deposition time. Meanwhile, the minimum RSD was achieved by the membrane fabricated at the longest deposition time and highest polyelectrolyte concentration. |
|---|