Effect of sintering parameters on physical properties of SS 316L alloy compact

Recently, metal injection moulding (MIM) has been identified as an economical fabrication technique for metal components. MIM, adapted from plastic injection moulding, has four major processing stages, which are: mixing of powder and binder system to produce feedstock, injection moulding, debinding...

Full description

Bibliographic Details
Main Authors:	Mohd Faizul Farhan, Ahmad Hamidi, W. S., Wan Harun, Osada, Toshiya, S. A., Che Ghani, Dayangku Noorfazidah, Awang Shri
Format:	Article
Language:	English
Published:	Penerbit UiTM 2017
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/21798/ http://umpir.ump.edu.my/id/eprint/21798/ http://umpir.ump.edu.my/id/eprint/21798/1/Effect%20of%20sintering%20parameters%20on%20physical%20properties%20of%20SS%20316L%20alloy%20compact.pdf

id	ump-21798
recordtype	eprints
spelling	ump-217982018-09-20T04:29:56Z http://umpir.ump.edu.my/id/eprint/21798/ Effect of sintering parameters on physical properties of SS 316L alloy compact Mohd Faizul Farhan, Ahmad Hamidi W. S., Wan Harun Osada, Toshiya S. A., Che Ghani Dayangku Noorfazidah, Awang Shri TJ Mechanical engineering and machinery Recently, metal injection moulding (MIM) has been identified as an economical fabrication technique for metal components. MIM, adapted from plastic injection moulding, has four major processing stages, which are: mixing of powder and binder system to produce feedstock, injection moulding, debinding and sintering. In this paper, the physical properties of SS 316L alloy sintered compact sintered at three different sintering parameters were discussed. Thermal properties of the feedstock were characterized by Thermogravimetric Analyzer (TGA) analysis. The debound compacts were sintered at 1100, 1200, and 1300 °C for 3 hours in the high pure argon atmosphere. The heating rate has been set at 10°C/min. The relative density, dimensional shrinkage and microstructure of the sintered compact were investigated. The relative density and dimensional shrinkage increased with the sintering parameters due to high densification of the sintered compact. Some pore sizes seemed to decrease with the increase in sintering temperature. Different sintering temperature shows a significant effect on the physical properties of the sintered compact. Penerbit UiTM 2017 Article PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/21798/1/Effect%20of%20sintering%20parameters%20on%20physical%20properties%20of%20SS%20316L%20alloy%20compact.pdf Mohd Faizul Farhan, Ahmad Hamidi and W. S., Wan Harun and Osada, Toshiya and S. A., Che Ghani and Dayangku Noorfazidah, Awang Shri (2017) Effect of sintering parameters on physical properties of SS 316L alloy compact. Journal of Mechanical Engineering, SI 3 (2). pp. 123-131. ISSN 1823- 5514 (Print); 2550-164X (Online) http://jmeche.com/wp-content/uploads/bsk-pdf-manager/P11_ID047_45.pdf
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Mohd Faizul Farhan, Ahmad Hamidi W. S., Wan Harun Osada, Toshiya S. A., Che Ghani Dayangku Noorfazidah, Awang Shri Effect of sintering parameters on physical properties of SS 316L alloy compact
description	Recently, metal injection moulding (MIM) has been identified as an economical fabrication technique for metal components. MIM, adapted from plastic injection moulding, has four major processing stages, which are: mixing of powder and binder system to produce feedstock, injection moulding, debinding and sintering. In this paper, the physical properties of SS 316L alloy sintered compact sintered at three different sintering parameters were discussed. Thermal properties of the feedstock were characterized by Thermogravimetric Analyzer (TGA) analysis. The debound compacts were sintered at 1100, 1200, and 1300 °C for 3 hours in the high pure argon atmosphere. The heating rate has been set at 10°C/min. The relative density, dimensional shrinkage and microstructure of the sintered compact were investigated. The relative density and dimensional shrinkage increased with the sintering parameters due to high densification of the sintered compact. Some pore sizes seemed to decrease with the increase in sintering temperature. Different sintering temperature shows a significant effect on the physical properties of the sintered compact.
format	Article
author	Mohd Faizul Farhan, Ahmad Hamidi W. S., Wan Harun Osada, Toshiya S. A., Che Ghani Dayangku Noorfazidah, Awang Shri
author_facet	Mohd Faizul Farhan, Ahmad Hamidi W. S., Wan Harun Osada, Toshiya S. A., Che Ghani Dayangku Noorfazidah, Awang Shri
author_sort	Mohd Faizul Farhan, Ahmad Hamidi
title	Effect of sintering parameters on physical properties of SS 316L alloy compact
title_short	Effect of sintering parameters on physical properties of SS 316L alloy compact
title_full	Effect of sintering parameters on physical properties of SS 316L alloy compact
title_fullStr	Effect of sintering parameters on physical properties of SS 316L alloy compact
title_full_unstemmed	Effect of sintering parameters on physical properties of SS 316L alloy compact
title_sort	effect of sintering parameters on physical properties of ss 316l alloy compact
publisher	Penerbit UiTM
publishDate	2017
url	http://umpir.ump.edu.my/id/eprint/21798/ http://umpir.ump.edu.my/id/eprint/21798/ http://umpir.ump.edu.my/id/eprint/21798/1/Effect%20of%20sintering%20parameters%20on%20physical%20properties%20of%20SS%20316L%20alloy%20compact.pdf
first_indexed	2023-09-18T22:32:08Z
last_indexed	2023-09-18T22:32:08Z
_version_	1777416356220633088

Effect of sintering parameters on physical properties of SS 316L alloy compact

Similar Items