Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061

Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061

This paper studied chip morphology in end milling of aluminium alloy 6061 by various cutting parameter such as feed rate, cutting speed and depth of cut. Slot milling operation were conducted. The analysis consists of chip morphology, chip weight, chip thickness and chip length. Scanning Electron Mi...

Full description

Bibliographic Details
Main Authors: Mohd Rasidi, Ibrahim, Najah, Mahadi, Afiff, Latif, Zulafiff, Rahim, Zazuli, Mohid, Mohammad Sukri, Mustapa, S. A., Che Ghani
Format: Conference or Workshop Item
Language:English
Published: Trans Tech Publications Ltd 2017
Subjects:
TJ Mechanical engineering and machinery
Online Access:http://umpir.ump.edu.my/id/eprint/20917/
http://umpir.ump.edu.my/id/eprint/20917/
http://umpir.ump.edu.my/id/eprint/20917/
http://umpir.ump.edu.my/id/eprint/20917/1/Research%20on%20Relationship%20between%20Cutting%20Conditions%20and%20Chip%20Formation%20during%20End%20Milling%20of%20Aluminium%20Alloy%206061.pdf
id ump-20917
recordtype eprints
spelling ump-209172018-07-10T07:57:15Z http://umpir.ump.edu.my/id/eprint/20917/ Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061 Mohd Rasidi, Ibrahim Najah, Mahadi Afiff, Latif Zulafiff, Rahim Zazuli, Mohid Mohammad Sukri, Mustapa S. A., Che Ghani TJ Mechanical engineering and machinery This paper studied chip morphology in end milling of aluminium alloy 6061 by various cutting parameter such as feed rate, cutting speed and depth of cut. Slot milling operation were conducted. The analysis consists of chip morphology, chip weight, chip thickness and chip length. Scanning Electron Microscope (SEM) were used to obtain and examine the chips. Result shows that, end milling with higher cutting speed, feed rate and depth of cut generated short, small and light weigh of chips. Trans Tech Publications Ltd 2017 Conference or Workshop Item PeerReviewed pdf en http://umpir.ump.edu.my/id/eprint/20917/1/Research%20on%20Relationship%20between%20Cutting%20Conditions%20and%20Chip%20Formation%20during%20End%20Milling%20of%20Aluminium%20Alloy%206061.pdf Mohd Rasidi, Ibrahim and Najah, Mahadi and Afiff, Latif and Zulafiff, Rahim and Zazuli, Mohid and Mohammad Sukri, Mustapa and S. A., Che Ghani (2017) Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061. In: 5th Asia Conference on Mechanical and Materials Engineering (ACMME 2017), 9-11 June 2017 , Tokyo, Japan. pp. 56-60., 909. ISSN 0255-5476 ISBN 978-303571291-9 https://doi.org/10.4028/www.scientific.net/MSF.909.56 DOI: 10.4028/www.scientific.net/MSF.909.56
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
Mohd Rasidi, Ibrahim
Najah, Mahadi
Afiff, Latif
Zulafiff, Rahim
Zazuli, Mohid
Mohammad Sukri, Mustapa
S. A., Che Ghani
Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
description This paper studied chip morphology in end milling of aluminium alloy 6061 by various cutting parameter such as feed rate, cutting speed and depth of cut. Slot milling operation were conducted. The analysis consists of chip morphology, chip weight, chip thickness and chip length. Scanning Electron Microscope (SEM) were used to obtain and examine the chips. Result shows that, end milling with higher cutting speed, feed rate and depth of cut generated short, small and light weigh of chips.
format Conference or Workshop Item
author Mohd Rasidi, Ibrahim
Najah, Mahadi
Afiff, Latif
Zulafiff, Rahim
Zazuli, Mohid
Mohammad Sukri, Mustapa
S. A., Che Ghani
author_facet Mohd Rasidi, Ibrahim
Najah, Mahadi
Afiff, Latif
Zulafiff, Rahim
Zazuli, Mohid
Mohammad Sukri, Mustapa
S. A., Che Ghani
author_sort Mohd Rasidi, Ibrahim
title Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
title_short Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
title_full Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
title_fullStr Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
title_full_unstemmed Research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
title_sort research on relationship between cutting conditions and chip formation during end milling of aluminium alloy 6061
publisher Trans Tech Publications Ltd
publishDate 2017
url http://umpir.ump.edu.my/id/eprint/20917/
http://umpir.ump.edu.my/id/eprint/20917/
http://umpir.ump.edu.my/id/eprint/20917/
http://umpir.ump.edu.my/id/eprint/20917/1/Research%20on%20Relationship%20between%20Cutting%20Conditions%20and%20Chip%20Formation%20during%20End%20Milling%20of%20Aluminium%20Alloy%206061.pdf
first_indexed 2023-09-18T22:30:27Z
last_indexed 2023-09-18T22:30:27Z
_version_ 1777416250099499008

Similar Items