Construct coil probe using GMR sensor for eddy current testing
Eddy current testing is a widely applied non-destructive technique in different sections of industries. Nowadays eddy current testing is an accurate, widely used and well-understood inspection technique, particularly in the aircraft and nuclear industries. The main purpose of this paper is to constr...
| Main Authors: | , , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2016
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/20708/ http://umpir.ump.edu.my/id/eprint/20708/1/Construct%20Coil%20Probe%20Using%20GMR%20Sensor%20for%20Eddy%20Current%20Testing.pdf |
| Summary: | Eddy current testing is a widely applied non-destructive technique in different sections of industries. Nowadays eddy current testing is an accurate, widely used and well-understood inspection technique, particularly in the aircraft and nuclear industries. The main purpose of this paper is to construct an eddy current probe by using transmission coil and using a Giant Magneto resistance (GMR) sensor for detection medium. This probe only use a magnetic field to operational in detection of flaws. A transmission coil is an object made from a material that is magnetized and creates its own persistent magnetic field. A GMR-coil probe has been used to inspect two different material of calibration block. Experimental results obtained by scanning A GMR-coil probe over Brass calibration block has 10 slots with different depth from 0.5mm to 5mm and mild steel has 8 slots with different depth from 0.5mm to 4mm are presented. The result prove that GMR-coil probe that operated using a magnetic field and sensor more effective on ferromagnetic material. |
|---|