Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia
Electrical resistivity method which was championed by geophysicist has increasingly popular in civil engineering application due to its efficiency in term of cost, time and data coverage. In the past, conventional forensic assessment related to the landslide has experienced several limitations due t...
Main Authors: | , , , |
---|---|
Format: | Article |
Language: | English |
Published: |
Elsevier Ltd
2017
|
Subjects: | |
Online Access: | http://umpir.ump.edu.my/id/eprint/20672/ http://umpir.ump.edu.my/id/eprint/20672/ http://umpir.ump.edu.my/id/eprint/20672/7/Forensic%20Assessment%20on%20Near%20Surface%20Landslide.pdf |
id |
ump-20672 |
---|---|
recordtype |
eprints |
spelling |
ump-206722018-08-06T03:42:57Z http://umpir.ump.edu.my/id/eprint/20672/ Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia Mohd Hazreek, Zainal Abidin Aziman, Madun Saiful Azhar, Ahmad Tajudin Mohd Fakhrurrazi, Ishak TA Engineering (General). Civil engineering (General) Electrical resistivity method which was championed by geophysicist has increasingly popular in civil engineering application due to its efficiency in term of cost, time and data coverage. In the past, conventional forensic assessment related to the landslide has experienced several limitations due to expensive, time consuming and limited data coverage. Hence, this study performed an alternative technique with particular reference to electrical resistivity imaging (ERI) in evaluating the slope failure at Kenyir Lake, Malaysia. During the data acquisition, two lines of ERI was performed using ABEM Terrameter LS set of equipment based on Schlumberger array. According to the ERI results produced, it was found that the subsurface profiles consist of completely weathered to highly weathered material (1 – 150 ohm.m), highly weathered to moderately weathered material (150 – 300 ohm.m), moderately weathered to hard material (300 – 2400 ohm.m) and fresh, hard and dry material (>2400 ohm.m). Moreover, electrical resistivity anomaly was managed to detect the presence of geological structure with particular reference to fault and rock discontinuities which associated to low resistivity anomaly. The heterogeneous of the subsurface material presented using integrated analysis of ERI and borehole data enabled forensic assessment of the landslide to be evaluated. The combination of heavy rainfall and existing geological structure (weakness zone) was believed to be a major factor which triggered this slope to be failed. This result was applicable to assist the geotechnical engineer in design concept recommendation of the slope remediation with fast, less cost and wide data coverage. Finally, ERI results with borehole verification was applicable to be adopted in landslide forensic assessment based on slope geomaterials stiffness variations generated after the slope movement. Furthermore, this electrical resistivity method adopts a surface technique that can minimize the disruption and damage to the site thus preserving a sustainable environment during the site data acquisition assessment. Elsevier Ltd 2017-12 Article PeerReviewed pdf en cc_by_nc_nd http://umpir.ump.edu.my/id/eprint/20672/7/Forensic%20Assessment%20on%20Near%20Surface%20Landslide.pdf Mohd Hazreek, Zainal Abidin and Aziman, Madun and Saiful Azhar, Ahmad Tajudin and Mohd Fakhrurrazi, Ishak (2017) Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia. Procedia Engineering, 171. pp. 434-444. ISSN 1877-7058 https://doi.org/10.1016/j.proeng.2017.01.354 |
repository_type |
Digital Repository |
institution_category |
Local University |
institution |
Universiti Malaysia Pahang |
building |
UMP Institutional Repository |
collection |
Online Access |
language |
English |
topic |
TA Engineering (General). Civil engineering (General) |
spellingShingle |
TA Engineering (General). Civil engineering (General) Mohd Hazreek, Zainal Abidin Aziman, Madun Saiful Azhar, Ahmad Tajudin Mohd Fakhrurrazi, Ishak Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia |
description |
Electrical resistivity method which was championed by geophysicist has increasingly popular in civil engineering application due to its efficiency in term of cost, time and data coverage. In the past, conventional forensic assessment related to the landslide has experienced several limitations due to expensive, time consuming and limited data coverage. Hence, this study performed an alternative technique with particular reference to electrical resistivity imaging (ERI) in evaluating the slope failure at Kenyir Lake, Malaysia. During the data acquisition, two lines of ERI was performed using ABEM Terrameter LS set of equipment based on Schlumberger array. According to the ERI results produced, it was found that the subsurface profiles consist of completely weathered to highly weathered material (1 – 150 ohm.m), highly weathered to moderately weathered material (150 – 300 ohm.m), moderately weathered to hard material (300 – 2400 ohm.m) and fresh, hard and dry material (>2400 ohm.m). Moreover, electrical resistivity anomaly was managed to detect the presence of geological structure with particular reference to fault and rock discontinuities which associated to low resistivity anomaly. The heterogeneous of the subsurface material presented using integrated analysis of ERI and borehole data enabled forensic assessment of the landslide to
be evaluated. The combination of heavy rainfall and existing geological structure (weakness zone) was believed to be a major factor which triggered this slope to be failed. This result was applicable to assist the geotechnical engineer in design concept recommendation of the slope remediation with fast, less cost and wide data coverage. Finally, ERI results with borehole verification was applicable to be adopted in landslide forensic assessment based on slope geomaterials stiffness variations generated after the slope movement. Furthermore, this electrical resistivity method
adopts a surface technique that can minimize the disruption and damage to the site thus preserving a sustainable environment during the site data acquisition assessment. |
format |
Article |
author |
Mohd Hazreek, Zainal Abidin Aziman, Madun Saiful Azhar, Ahmad Tajudin Mohd Fakhrurrazi, Ishak |
author_facet |
Mohd Hazreek, Zainal Abidin Aziman, Madun Saiful Azhar, Ahmad Tajudin Mohd Fakhrurrazi, Ishak |
author_sort |
Mohd Hazreek, Zainal Abidin |
title |
Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia |
title_short |
Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia |
title_full |
Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia |
title_fullStr |
Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia |
title_full_unstemmed |
Forensic assessment on near surface landslide using electrical resistivity imaging (ERI) at Kenyir lake area in Terengganu, Malaysia |
title_sort |
forensic assessment on near surface landslide using electrical resistivity imaging (eri) at kenyir lake area in terengganu, malaysia |
publisher |
Elsevier Ltd |
publishDate |
2017 |
url |
http://umpir.ump.edu.my/id/eprint/20672/ http://umpir.ump.edu.my/id/eprint/20672/ http://umpir.ump.edu.my/id/eprint/20672/7/Forensic%20Assessment%20on%20Near%20Surface%20Landslide.pdf |
first_indexed |
2023-09-18T22:29:57Z |
last_indexed |
2023-09-18T22:29:57Z |
_version_ |
1777416218959937536 |