Titanium Oxide with Nanocoolant for Heat Exchanger Application

The objective of this paper is to investigate the properties of oil-based nanofluids and produce stable and biodegradable oil-based nanofluids by metal oxide nanoparticles. The cooking oil was used as a base for the nanofluid preparation. Titanium oxide was embedded as the nanoparticles, mixed with...

Full description

Bibliographic Details
Main Authors:	Kottasamy, A., K., Kadirgama, Keeran, Annamalai, Mohanesan, K., D., Ramasamy, M. M., Rahman, M. M., Noor, M. Razali, Hanipah
Format:	Article
Language:	English
Published:	Faculty Mechanical Engineering, UMP 2017
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/20367/ http://umpir.ump.edu.my/id/eprint/20367/ http://umpir.ump.edu.my/id/eprint/20367/ http://umpir.ump.edu.my/id/eprint/20367/1/6_Kottasamy%20et%20al%281%29.pdf

id	ump-20367
recordtype	eprints
spelling	ump-203672018-07-25T04:54:52Z http://umpir.ump.edu.my/id/eprint/20367/ Titanium Oxide with Nanocoolant for Heat Exchanger Application Kottasamy, A. K., Kadirgama Keeran, Annamalai Mohanesan, K. D., Ramasamy M. M., Rahman M. M., Noor M. Razali, Hanipah TJ Mechanical engineering and machinery The objective of this paper is to investigate the properties of oil-based nanofluids and produce stable and biodegradable oil-based nanofluids by metal oxide nanoparticles. The cooking oil was used as a base for the nanofluid preparation. Titanium oxide was embedded as the nanoparticles, mixed with cooking oil volume concentration of nanofluids specimens, and labelled as 0.01, 0.03, 0.05, 0.07, and 0.09. The study explained the analysis techniques applied to determine the enhancement of thermal properties of nanofluids. The thermal conductivity of nanofluids was studied by heat transfer rate and the overall heat transfer coefficient gained. The metal oxide nanomaterials were mixed with the oil-based fluids in order to prepare the specimens. This research focused on the usage of vegetable oil and titanium oxide nanoparticles mixture to form nanofluids. The results obtained indicated that the nanofluid gave better thermal conductivity than oil-based fluids. The results significantly increased the thermal properties limitation and improved the product reliability. The enhancement of heat transfer rate for 0.09% of nanofluid volume concentration was increased by 36.25% Faculty Mechanical Engineering, UMP 2017-09-01 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/20367/1/6_Kottasamy%20et%20al%281%29.pdf Kottasamy, A. and K., Kadirgama and Keeran, Annamalai and Mohanesan, K. and D., Ramasamy and M. M., Rahman and M. M., Noor and M. Razali, Hanipah (2017) Titanium Oxide with Nanocoolant for Heat Exchanger Application. Journal of Mechanical Engineering and Sciences (JMES) , 11 (3). pp. 2834-2844. ISSN 2289-4659 (print); 2231-8380 (online) http://jmes.ump.edu.my/images/Volume%2011%20Issue%203%20September%202017/6_Kottasamy%20et%20al.pdf doi: 10.15282/jmes.11.3.2017.6.0257
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Kottasamy, A. K., Kadirgama Keeran, Annamalai Mohanesan, K. D., Ramasamy M. M., Rahman M. M., Noor M. Razali, Hanipah Titanium Oxide with Nanocoolant for Heat Exchanger Application
description	The objective of this paper is to investigate the properties of oil-based nanofluids and produce stable and biodegradable oil-based nanofluids by metal oxide nanoparticles. The cooking oil was used as a base for the nanofluid preparation. Titanium oxide was embedded as the nanoparticles, mixed with cooking oil volume concentration of nanofluids specimens, and labelled as 0.01, 0.03, 0.05, 0.07, and 0.09. The study explained the analysis techniques applied to determine the enhancement of thermal properties of nanofluids. The thermal conductivity of nanofluids was studied by heat transfer rate and the overall heat transfer coefficient gained. The metal oxide nanomaterials were mixed with the oil-based fluids in order to prepare the specimens. This research focused on the usage of vegetable oil and titanium oxide nanoparticles mixture to form nanofluids. The results obtained indicated that the nanofluid gave better thermal conductivity than oil-based fluids. The results significantly increased the thermal properties limitation and improved the product reliability. The enhancement of heat transfer rate for 0.09% of nanofluid volume concentration was increased by 36.25%
format	Article
author	Kottasamy, A. K., Kadirgama Keeran, Annamalai Mohanesan, K. D., Ramasamy M. M., Rahman M. M., Noor M. Razali, Hanipah
author_facet	Kottasamy, A. K., Kadirgama Keeran, Annamalai Mohanesan, K. D., Ramasamy M. M., Rahman M. M., Noor M. Razali, Hanipah
author_sort	Kottasamy, A.
title	Titanium Oxide with Nanocoolant for Heat Exchanger Application
title_short	Titanium Oxide with Nanocoolant for Heat Exchanger Application
title_full	Titanium Oxide with Nanocoolant for Heat Exchanger Application
title_fullStr	Titanium Oxide with Nanocoolant for Heat Exchanger Application
title_full_unstemmed	Titanium Oxide with Nanocoolant for Heat Exchanger Application
title_sort	titanium oxide with nanocoolant for heat exchanger application
publisher	Faculty Mechanical Engineering, UMP
publishDate	2017
url	http://umpir.ump.edu.my/id/eprint/20367/ http://umpir.ump.edu.my/id/eprint/20367/ http://umpir.ump.edu.my/id/eprint/20367/ http://umpir.ump.edu.my/id/eprint/20367/1/6_Kottasamy%20et%20al%281%29.pdf
first_indexed	2023-09-18T22:29:19Z
last_indexed	2023-09-18T22:29:19Z
_version_	1777416179411845120

Titanium Oxide with Nanocoolant for Heat Exchanger Application

Similar Items