Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics

Aerodynamics drag was considered for giving better efficiency for a car on the road. The development of drag on a vehicle body was studied. The main objective was to determine the maximum drag occurring on the car body drag of the hybrid electric vehicle (HEV). The analysis was conducted on the car...

Full description

Bibliographic Details
Main Authors: D., Ramasamy, Mohanesan, K, K., Kadirgama, M. M., Noor, M. M., Rahman
Format: Article
Language:English
Published: Universiti Malaysia Pahang 2017
Subjects:
Online Access:http://umpir.ump.edu.my/id/eprint/20065/
http://umpir.ump.edu.my/id/eprint/20065/
http://umpir.ump.edu.my/id/eprint/20065/
http://umpir.ump.edu.my/id/eprint/20065/1/8_Ramasamy%20et%20al.pdf
id ump-20065
recordtype eprints
spelling ump-200652018-01-18T08:13:21Z http://umpir.ump.edu.my/id/eprint/20065/ Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics D., Ramasamy Mohanesan, K K., Kadirgama M. M., Noor M. M., Rahman TJ Mechanical engineering and machinery Aerodynamics drag was considered for giving better efficiency for a car on the road. The development of drag on a vehicle body was studied. The main objective was to determine the maximum drag occurring on the car body drag of the hybrid electric vehicle (HEV). The analysis was conducted on the car speed ranging between 40 km/h to 110 km/h using pressure points at various parts of the car. The car body was modelled in CAD using the mass and momentum equations discretized for an analysis. The technique to estimate the drag used was input of car body-drag (CFD) and exporting it to finite element analysis (FEA) to find the value of aerodynamics drag in terms of drag forces and drag coefficient. The values were validated with actual pressure reading from pressure probes on the car body. The result showed that contour and trajectories plots were also used to analyse the characteristics of streamlines flow or boundary layer occurred on the body of this model, especially for the forebody, upper body and rear body. The maximum rise of aerodynamics drag occurred between velocities of 80 km/h and 90 km/h which was about 5.04 % increase of drag coefficient. Further analysis is required with wind tunnels. Universiti Malaysia Pahang 2017 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/20065/1/8_Ramasamy%20et%20al.pdf D., Ramasamy and Mohanesan, K and K., Kadirgama and M. M., Noor and M. M., Rahman (2017) Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics. International Journal of Automotive and Mechanical Engineering (IJAME), 14 (3). pp. 4496-4507. ISSN 1985-9325(Print); 2180-1606 (Online) http://dx.doi.org/10.15282/ijame.14.3.2017.8.0355 doi: 10.15282/ijame.14.3.2017.8.0355
repository_type Digital Repository
institution_category Local University
institution Universiti Malaysia Pahang
building UMP Institutional Repository
collection Online Access
language English
topic TJ Mechanical engineering and machinery
spellingShingle TJ Mechanical engineering and machinery
D., Ramasamy
Mohanesan, K
K., Kadirgama
M. M., Noor
M. M., Rahman
Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics
description Aerodynamics drag was considered for giving better efficiency for a car on the road. The development of drag on a vehicle body was studied. The main objective was to determine the maximum drag occurring on the car body drag of the hybrid electric vehicle (HEV). The analysis was conducted on the car speed ranging between 40 km/h to 110 km/h using pressure points at various parts of the car. The car body was modelled in CAD using the mass and momentum equations discretized for an analysis. The technique to estimate the drag used was input of car body-drag (CFD) and exporting it to finite element analysis (FEA) to find the value of aerodynamics drag in terms of drag forces and drag coefficient. The values were validated with actual pressure reading from pressure probes on the car body. The result showed that contour and trajectories plots were also used to analyse the characteristics of streamlines flow or boundary layer occurred on the body of this model, especially for the forebody, upper body and rear body. The maximum rise of aerodynamics drag occurred between velocities of 80 km/h and 90 km/h which was about 5.04 % increase of drag coefficient. Further analysis is required with wind tunnels.
format Article
author D., Ramasamy
Mohanesan, K
K., Kadirgama
M. M., Noor
M. M., Rahman
author_facet D., Ramasamy
Mohanesan, K
K., Kadirgama
M. M., Noor
M. M., Rahman
author_sort D., Ramasamy
title Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics
title_short Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics
title_full Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics
title_fullStr Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics
title_full_unstemmed Hybrid Electric Vehicle Car Body Drag Analysis using Computational Fluid Dynamics
title_sort hybrid electric vehicle car body drag analysis using computational fluid dynamics
publisher Universiti Malaysia Pahang
publishDate 2017
url http://umpir.ump.edu.my/id/eprint/20065/
http://umpir.ump.edu.my/id/eprint/20065/
http://umpir.ump.edu.my/id/eprint/20065/
http://umpir.ump.edu.my/id/eprint/20065/1/8_Ramasamy%20et%20al.pdf
first_indexed 2023-09-18T22:28:44Z
last_indexed 2023-09-18T22:28:44Z
_version_ 1777416142606827520