Analysis the effect of different type valve use at different pressure in piping system

This project was carried out as a study of flow rate using a single channel acoustic emission (AE) technique. The objective of this project is to study the effect of ball valve, brass gate valve and brass stop cock valve to flow rate using AE technique. A test rig consists of the circumferential gal...

Full description

Bibliographic Details
Main Author:	Muzakkir, Shukri
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/1729/ http://umpir.ump.edu.my/id/eprint/1729/ http://umpir.ump.edu.my/id/eprint/1729/1/Muzakkir_Shukri_%28_CD_5113_%29.pdf

id	ump-1729
recordtype	eprints
spelling	ump-17292015-03-03T07:52:29Z http://umpir.ump.edu.my/id/eprint/1729/ Analysis the effect of different type valve use at different pressure in piping system Muzakkir, Shukri TA Engineering (General). Civil engineering (General) This project was carried out as a study of flow rate using a single channel acoustic emission (AE) technique. The objective of this project is to study the effect of ball valve, brass gate valve and brass stop cock valve to flow rate using AE technique. A test rig consists of the circumferential galvanized steel pipe, ball valve, gate valve and stop cock valve to run the experiments. The fluid used was water throughout the experiments. The pressure of water was controlled by a valve. The source of AE signal was from the valve and it was captured using AE sensor with the help of Acoustic Emission Detector 2.1.3 software. For all valve conditions, the value of hits, count and RMS (average, maximum and minimum) were recorded and analyzed. All the value recorded were compared among the ball valve, gate valve and stop cock valve. The results were gained from 10 marked points each for all type of valve. The result showed that there was no AE activity on the pipe without valve, the AE activities are greater for high pressure or full close valve. In addition from the RMS against distance graft, RMS value increased when pressure is increased. From the flow rate against RMS graf show that flow rate will decrease when RMS is increased. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1729/1/Muzakkir_Shukri_%28_CD_5113_%29.pdf Muzakkir, Shukri (2010) Analysis the effect of different type valve use at different pressure in piping system. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:51871&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Muzakkir, Shukri Analysis the effect of different type valve use at different pressure in piping system
description	This project was carried out as a study of flow rate using a single channel acoustic emission (AE) technique. The objective of this project is to study the effect of ball valve, brass gate valve and brass stop cock valve to flow rate using AE technique. A test rig consists of the circumferential galvanized steel pipe, ball valve, gate valve and stop cock valve to run the experiments. The fluid used was water throughout the experiments. The pressure of water was controlled by a valve. The source of AE signal was from the valve and it was captured using AE sensor with the help of Acoustic Emission Detector 2.1.3 software. For all valve conditions, the value of hits, count and RMS (average, maximum and minimum) were recorded and analyzed. All the value recorded were compared among the ball valve, gate valve and stop cock valve. The results were gained from 10 marked points each for all type of valve. The result showed that there was no AE activity on the pipe without valve, the AE activities are greater for high pressure or full close valve. In addition from the RMS against distance graft, RMS value increased when pressure is increased. From the flow rate against RMS graf show that flow rate will decrease when RMS is increased.
format	Undergraduates Project Papers
author	Muzakkir, Shukri
author_facet	Muzakkir, Shukri
author_sort	Muzakkir, Shukri
title	Analysis the effect of different type valve use at different pressure in piping system
title_short	Analysis the effect of different type valve use at different pressure in piping system
title_full	Analysis the effect of different type valve use at different pressure in piping system
title_fullStr	Analysis the effect of different type valve use at different pressure in piping system
title_full_unstemmed	Analysis the effect of different type valve use at different pressure in piping system
title_sort	analysis the effect of different type valve use at different pressure in piping system
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/1729/ http://umpir.ump.edu.my/id/eprint/1729/ http://umpir.ump.edu.my/id/eprint/1729/1/Muzakkir_Shukri_%28_CD_5113_%29.pdf
first_indexed	2023-09-18T21:54:55Z
last_indexed	2023-09-18T21:54:55Z
_version_	1777414015052414976

Analysis the effect of different type valve use at different pressure in piping system

Similar Items