Failure of drive shaft using finite element analysis
This project presented about a failure of drive shaft in conventional passenger vehicles. Perodua Kancil front wheel drive shaft was chosen as the specimen of this analysis. This project deals with analysis on stress using finite element method. The solid model of the drive shaft need to be construc...
| Main Author: | |
|---|---|
| Format: | Undergraduates Project Papers |
| Language: | English |
| Published: |
2010
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/1706/ http://umpir.ump.edu.my/id/eprint/1706/ http://umpir.ump.edu.my/id/eprint/1706/1/Mohd_Zulhilmi_Md_Yusof_%28_CD_5087_%29.pdf |
| id |
ump-1706 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-17062015-03-03T07:52:21Z http://umpir.ump.edu.my/id/eprint/1706/ Failure of drive shaft using finite element analysis Mohd Zulhilmi, Md Yusof TJ Mechanical engineering and machinery This project presented about a failure of drive shaft in conventional passenger vehicles. Perodua Kancil front wheel drive shaft was chosen as the specimen of this analysis. This project deals with analysis on stress using finite element method. The solid model of the drive shaft need to be constructs using SOLIDWORK software. The type of material used in the drive shaft need to be known first before stress analysis can be performed using Patran-Nastran software. The known material will provide the information such as density, modulus of elasticity and tensile strength required for the software to perform the stress and failure analysis. Spectroscopic analysis is carried out using FOUNDRY-MASTER UV instrument. The load applied at the ends of the shaft that are lateral bending load of 1/4 of weight of the full car. Boundary conditions are applied at the bearing and geared location. The highest stress at and displacement was predicted occurred at the fillet cross section location. Stresses will concentrate in the smaller diameter portion due to change in shaft diameter as they pass from large to the small diameter. In any case, one must determine the cause of failure and predict the fatigue life to prevent future occurrence and to improve the performance of the device, component or structure. 2010-12 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1706/1/Mohd_Zulhilmi_Md_Yusof_%28_CD_5087_%29.pdf Mohd Zulhilmi, Md Yusof (2010) Failure of drive shaft using finite element analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:52148&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English |
| topic |
TJ Mechanical engineering and machinery |
| spellingShingle |
TJ Mechanical engineering and machinery Mohd Zulhilmi, Md Yusof Failure of drive shaft using finite element analysis |
| description |
This project presented about a failure of drive shaft in conventional passenger vehicles. Perodua Kancil front wheel drive shaft was chosen as the specimen of this analysis. This project deals with analysis on stress using finite element method. The solid model of the drive shaft need to be constructs using SOLIDWORK software. The type of material used in the drive shaft need to be known first before stress analysis can be performed using Patran-Nastran software. The known material will provide the information such as density, modulus of elasticity and tensile strength required for the software to perform the stress and failure analysis. Spectroscopic analysis is carried out using FOUNDRY-MASTER UV instrument. The load applied at the ends of the shaft that are lateral bending load of 1/4 of weight of the full car. Boundary conditions are applied at the bearing and geared location. The highest stress at and displacement was predicted occurred at the fillet cross section location. Stresses will concentrate in the smaller diameter portion due to change in shaft diameter as they pass from large to the small diameter. In any case, one must determine the cause of failure and predict the fatigue life to prevent future occurrence and to improve the performance of the device, component or structure. |
| format |
Undergraduates Project Papers |
| author |
Mohd Zulhilmi, Md Yusof |
| author_facet |
Mohd Zulhilmi, Md Yusof |
| author_sort |
Mohd Zulhilmi, Md Yusof |
| title |
Failure of drive shaft using finite element analysis |
| title_short |
Failure of drive shaft using finite element analysis |
| title_full |
Failure of drive shaft using finite element analysis |
| title_fullStr |
Failure of drive shaft using finite element analysis |
| title_full_unstemmed |
Failure of drive shaft using finite element analysis |
| title_sort |
failure of drive shaft using finite element analysis |
| publishDate |
2010 |
| url |
http://umpir.ump.edu.my/id/eprint/1706/ http://umpir.ump.edu.my/id/eprint/1706/ http://umpir.ump.edu.my/id/eprint/1706/1/Mohd_Zulhilmi_Md_Yusof_%28_CD_5087_%29.pdf |
| first_indexed |
2023-09-18T21:54:53Z |
| last_indexed |
2023-09-18T21:54:53Z |
| _version_ |
1777414012435169280 |