Performance Analysis of a Domestic Refrigerator in Malaysia using Experimental Method
Refrigerator is one of the home appliance utilizing mechanical vapour compression cycle in it process. Performance of the system becomes main issue and many researches are still ongoing to evaluate and improve efficiency of the system. Therefore, this paper presents the developme...
| Main Authors: | , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2009
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/1549/ http://umpir.ump.edu.my/id/eprint/1549/1/Performance_Analysis_of_a_Domestic_Refrigerator_in_Malaysia_using_Experimental.pdf |
| Summary: | Refrigerator is one of the home appliance utilizing mechanical vapour compression cycle in it process. Performance of the system becomes main issue and many researches are still ongoing to evaluate and improve efficiency of the system. Therefore, this paper presents the development process of refrigerator test rig and performance evaluation of a domestic refrigerator
that has been used in Malaysia. The experiment platform which called test rig was developed from refrigerator model NRB33TA National brand. The main objective in this study was to obtain performance of the refrigeration system in term of Coefficient of Performance (COP) by determining three important parameters during in operating mode which are temperature, pressure and refrigerant flowrate. In the test rig, all temperature probes were connected to thermocouple scanner to measure temperature at particular points on the refrigeration system. Pressure gauges were used to measure pressure and a magnetic flowmeter was used to measure refrigerant
flowrate. In order to avoid effects of a changing the measured data, the environmental of testing was controlled according to Association of Home Appliance (AHAM) standard. There are five sets of experiment data were collected in order to evaluate the COP of the refrigerator. Each data was collected for a cycle of operation in about 2 hours. The result shows that the average COP of the refrigeration system using the refrigerator test rig was about 2.7. |
|---|