Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding

The friction stir welding process is witnessing a growth in its application in a wide range of The friction stir welding (FSW) process is witnessing a growth in a wide range of industrial applications due the minimal governing parameters and many other advantages as a solid state welding compared to...

Full description

Bibliographic Details
Main Authors:	Mohamed, Mohamed Ackiel, Manurung, Yupiter HP, L. H., Shah, Nurul Hidayah, Othman
Format:	Conference or Workshop Item
Language:	English
Published:	2015
Online Access:	http://umpir.ump.edu.my/id/eprint/14443/ http://umpir.ump.edu.my/id/eprint/14443/ http://umpir.ump.edu.my/id/eprint/14443/1/fkm-2015-hidayah-Optimization%20of%20HFMIPIT%20Parameters.pdf

id	ump-14443
recordtype	eprints
spelling	ump-144432016-09-21T04:39:52Z http://umpir.ump.edu.my/id/eprint/14443/ Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding Mohamed, Mohamed Ackiel Manurung, Yupiter HP L. H., Shah Nurul Hidayah, Othman The friction stir welding process is witnessing a growth in its application in a wide range of The friction stir welding (FSW) process is witnessing a growth in a wide range of industrial applications due the minimal governing parameters and many other advantages as a solid state welding compared to the commonly used fusion welding process. However, tensile residual stress remains to be significant concern due to its extensive clamping and stirring process which can lead to lower fatigue resistance particularly in structures subjected to fluctuating loads. Up to day, research dealing with fatigue enhancements methods for FSW is rarely found in literature. This novel study presents an unconventional method to optimize the governing process parameters of Pneumatic Impact Treatment (PIT) also known as one of the High Frequency Mechanical Impact (HFMI) techniques. The post weld treatment is aimed to enhance fatigue resistance of FSW butt joints. The experimental study was conducted for Aluminum alloy (AA 6061) plates with thickness of 6 mm under varied PIT parameters centered on the intender pin diameter, applied air pressure and hammering frequency. The investigation began with obtaining optimum parameters for single response by using conventional Taguchi method with L9 orthogonal array. Further, advanced optimization approach by means of Multi-objective Taguchi Method (MTM) attempts to consider the multiple quality features simultaneously which are hardness value and fatigue life cycle. The significant level of the PIT parameters was investigated by using analysis of variance (ANOVA). As the final results, the optimum value was acquired by calculating the total normalized quality loss (TNQL) and multi signal to noise ratio (MSNR). Subsequent confirmation test was conducted upon determination of the optimized PIT parameters. 2015 Conference or Workshop Item PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/14443/1/fkm-2015-hidayah-Optimization%20of%20HFMIPIT%20Parameters.pdf Mohamed, Mohamed Ackiel and Manurung, Yupiter HP and L. H., Shah and Nurul Hidayah, Othman (2015) Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding. In: 68th IW International Conference High-Strength Materials, 2-3 July 2015 , Helsinki, Finland. pp. 1-8.. http://dx.doi.org/10.13140/RG.2.1.4115.5047
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
description	The friction stir welding process is witnessing a growth in its application in a wide range of The friction stir welding (FSW) process is witnessing a growth in a wide range of industrial applications due the minimal governing parameters and many other advantages as a solid state welding compared to the commonly used fusion welding process. However, tensile residual stress remains to be significant concern due to its extensive clamping and stirring process which can lead to lower fatigue resistance particularly in structures subjected to fluctuating loads. Up to day, research dealing with fatigue enhancements methods for FSW is rarely found in literature. This novel study presents an unconventional method to optimize the governing process parameters of Pneumatic Impact Treatment (PIT) also known as one of the High Frequency Mechanical Impact (HFMI) techniques. The post weld treatment is aimed to enhance fatigue resistance of FSW butt joints. The experimental study was conducted for Aluminum alloy (AA 6061) plates with thickness of 6 mm under varied PIT parameters centered on the intender pin diameter, applied air pressure and hammering frequency. The investigation began with obtaining optimum parameters for single response by using conventional Taguchi method with L9 orthogonal array. Further, advanced optimization approach by means of Multi-objective Taguchi Method (MTM) attempts to consider the multiple quality features simultaneously which are hardness value and fatigue life cycle. The significant level of the PIT parameters was investigated by using analysis of variance (ANOVA). As the final results, the optimum value was acquired by calculating the total normalized quality loss (TNQL) and multi signal to noise ratio (MSNR). Subsequent confirmation test was conducted upon determination of the optimized PIT parameters.
format	Conference or Workshop Item
author	Mohamed, Mohamed Ackiel Manurung, Yupiter HP L. H., Shah Nurul Hidayah, Othman
spellingShingle	Mohamed, Mohamed Ackiel Manurung, Yupiter HP L. H., Shah Nurul Hidayah, Othman Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
author_facet	Mohamed, Mohamed Ackiel Manurung, Yupiter HP L. H., Shah Nurul Hidayah, Othman
author_sort	Mohamed, Mohamed Ackiel
title	Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
title_short	Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
title_full	Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
title_fullStr	Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
title_full_unstemmed	Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding
title_sort	optimization of hfmi/pit parameters with simultaneous multiple response consideration using multi-objective taguchi method for fatigue life enhancement of friction stir welding
publishDate	2015
url	http://umpir.ump.edu.my/id/eprint/14443/ http://umpir.ump.edu.my/id/eprint/14443/ http://umpir.ump.edu.my/id/eprint/14443/1/fkm-2015-hidayah-Optimization%20of%20HFMIPIT%20Parameters.pdf
first_indexed	2023-09-18T22:18:12Z
last_indexed	2023-09-18T22:18:12Z
_version_	1777415479572299776

Optimization of HFMI/PIT Parameters with Simultaneous Multiple Response Consideration using Multi-Objective Taguchi Method for Fatigue Life Enhancement of Friction Stir Welding

Similar Items