Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material

Cutting force is one of the main factors to be considered in CNC milling machine. Prediction models and optimum values are very important for the machinist to save number of cutting tools and reduce machining time. This paper discussed the effect of the two different angles (90° and 70°) of tool hol...

Full description

Bibliographic Details
Main Author:	K., Kadirgama
Format:	Conference or Workshop Item
Language:	English
Published:	2009
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/1395/ http://umpir.ump.edu.my/id/eprint/1395/1/2009_RAMM09_Tool_Holder_M.M.Noor_K.Kadirgama.pdf

id	ump-1395
recordtype	eprints
spelling	ump-13952018-01-31T01:01:22Z http://umpir.ump.edu.my/id/eprint/1395/ Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material K., Kadirgama TJ Mechanical engineering and machinery Cutting force is one of the main factors to be considered in CNC milling machine. Prediction models and optimum values are very important for the machinist to save number of cutting tools and reduce machining time. This paper discussed the effect of the two different angles (90° and 70°) of tool holder on cutting force when machining aerospace material (Hastelloy C-22HS) in two different environments (dry and flood). The 90o tool holder is suitable to be used in rough machining, milling casting part, internal facing with low accuracy and others. It can be used in the condition of high cutting speed, high feed rate and high axial depth. On the other hand, the 70o tool holder is more suitable for milling operation of final machining component, hard material, etc. Response surface method (RSM) was used to minimize the number of experiments. First order models were developed to optimize the machining parameters (cutting speed, federate and axial depth) and obtain the optimum cutting force. It observed that low value cutting parameters need to be used for 70° tool holders, meanwhile for 90° tool holders high value cutting parameters can be used. Both angle of tool holder not suitable be used in dry cutting since the cutting force produced very high for machining purpose. 2009 Conference or Workshop Item PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1395/1/2009_RAMM09_Tool_Holder_M.M.Noor_K.Kadirgama.pdf K., Kadirgama (2009) Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material. In: International Conference on Recent Advances in Materials, Minerals & Environment, 1 hingga 3 Jun 2009 , Bayview Beach Resort, Batu Ferringhi, Penang, Malaysia,. .
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery K., Kadirgama Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
description	Cutting force is one of the main factors to be considered in CNC milling machine. Prediction models and optimum values are very important for the machinist to save number of cutting tools and reduce machining time. This paper discussed the effect of the two different angles (90° and 70°) of tool holder on cutting force when machining aerospace material (Hastelloy C-22HS) in two different environments (dry and flood). The 90o tool holder is suitable to be used in rough machining, milling casting part, internal facing with low accuracy and others. It can be used in the condition of high cutting speed, high feed rate and high axial depth. On the other hand, the 70o tool holder is more suitable for milling operation of final machining component, hard material, etc. Response surface method (RSM) was used to minimize the number of experiments. First order models were developed to optimize the machining parameters (cutting speed, federate and axial depth) and obtain the optimum cutting force. It observed that low value cutting parameters need to be used for 70° tool holders, meanwhile for 90° tool holders high value cutting parameters can be used. Both angle of tool holder not suitable be used in dry cutting since the cutting force produced very high for machining purpose.
format	Conference or Workshop Item
author	K., Kadirgama
author_facet	K., Kadirgama
author_sort	K., Kadirgama
title	Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
title_short	Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
title_full	Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
title_fullStr	Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
title_full_unstemmed	Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material
title_sort	effect of tool holder angles on cutting force when machining aerospace material
publishDate	2009
url	http://umpir.ump.edu.my/id/eprint/1395/ http://umpir.ump.edu.my/id/eprint/1395/1/2009_RAMM09_Tool_Holder_M.M.Noor_K.Kadirgama.pdf
first_indexed	2023-09-18T21:54:29Z
last_indexed	2023-09-18T21:54:29Z
_version_	1777413987982376960

Effect of Tool Holder Angles on Cutting Force When Machining Aerospace Material

Similar Items