Design and fabricate rocket engine

The objective of this project is to design and fabricate the Rocket Engine.This project describe the shape of Rocket that will fabricate follow the dimension that give by my supervisor.Actually there a several type of Rocket Engine.There are Rocket Engine based of thermal,water,hybrid,solid,and resi...

Full description

Bibliographic Details
Main Author:	Tg Kamarul Azhan, Tg Kamaruddin
Format:	Undergraduates Project Papers
Language:	English
Published:	2010
Subjects:	TL Motor vehicles. Aeronautics. Astronautics
Online Access:	http://umpir.ump.edu.my/id/eprint/1387/ http://umpir.ump.edu.my/id/eprint/1387/1/Tg._Kamarul_Azhan_Tg._Kamaruddin_%28CD_4910%29.pdf

id	ump-1387
recordtype	eprints
spelling	ump-13872015-03-03T07:50:40Z http://umpir.ump.edu.my/id/eprint/1387/ Design and fabricate rocket engine Tg Kamarul Azhan, Tg Kamaruddin TL Motor vehicles. Aeronautics. Astronautics The objective of this project is to design and fabricate the Rocket Engine.This project describe the shape of Rocket that will fabricate follow the dimension that give by my supervisor.Actually there a several type of Rocket Engine.There are Rocket Engine based of thermal,water,hybrid,solid,and resistojet(electronic).So,the Rocket that will fabricate is from the solid type.One of the important thing a rocket is type of noozle,from the research in the internet De’Laval Noozle is the better type of noozle to use.Then material also another important thing in making Rocket.Material that will use must have good enough strenght to hold the explosion that will happen to move up the rocket.The better material is Stainless Steel it is light and have a good strenght,but cause of limited soucrce the material that use for make this Rocket is from mild steel.It is also have good strenght but it heavy than stainless steel.This project start from making the design and make it using Solid Work Software.Finish the design then the rocket can be made use a Lathe Machnine.Majority this rocket will be made by Lathe Machine.But from the start of fabricte the machine that involve also like bendsaw and drilling machine.Rocket engine that will be made have three part.First part is cap to close the hole on the upper body,a body and noozle.All this part will be assembly and were tied by bolt.It was susessfully done and able to function as needed. 2010-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1387/1/Tg._Kamarul_Azhan_Tg._Kamaruddin_%28CD_4910%29.pdf Tg Kamarul Azhan, Tg Kamaruddin (2010) Design and fabricate rocket engine. Faculty of Mechanical Engineering, Universiti Malaysia Pahang.
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TL Motor vehicles. Aeronautics. Astronautics
spellingShingle	TL Motor vehicles. Aeronautics. Astronautics Tg Kamarul Azhan, Tg Kamaruddin Design and fabricate rocket engine
description	The objective of this project is to design and fabricate the Rocket Engine.This project describe the shape of Rocket that will fabricate follow the dimension that give by my supervisor.Actually there a several type of Rocket Engine.There are Rocket Engine based of thermal,water,hybrid,solid,and resistojet(electronic).So,the Rocket that will fabricate is from the solid type.One of the important thing a rocket is type of noozle,from the research in the internet De’Laval Noozle is the better type of noozle to use.Then material also another important thing in making Rocket.Material that will use must have good enough strenght to hold the explosion that will happen to move up the rocket.The better material is Stainless Steel it is light and have a good strenght,but cause of limited soucrce the material that use for make this Rocket is from mild steel.It is also have good strenght but it heavy than stainless steel.This project start from making the design and make it using Solid Work Software.Finish the design then the rocket can be made use a Lathe Machnine.Majority this rocket will be made by Lathe Machine.But from the start of fabricte the machine that involve also like bendsaw and drilling machine.Rocket engine that will be made have three part.First part is cap to close the hole on the upper body,a body and noozle.All this part will be assembly and were tied by bolt.It was susessfully done and able to function as needed.
format	Undergraduates Project Papers
author	Tg Kamarul Azhan, Tg Kamaruddin
author_facet	Tg Kamarul Azhan, Tg Kamaruddin
author_sort	Tg Kamarul Azhan, Tg Kamaruddin
title	Design and fabricate rocket engine
title_short	Design and fabricate rocket engine
title_full	Design and fabricate rocket engine
title_fullStr	Design and fabricate rocket engine
title_full_unstemmed	Design and fabricate rocket engine
title_sort	design and fabricate rocket engine
publishDate	2010
url	http://umpir.ump.edu.my/id/eprint/1387/ http://umpir.ump.edu.my/id/eprint/1387/1/Tg._Kamarul_Azhan_Tg._Kamaruddin_%28CD_4910%29.pdf
first_indexed	2023-09-18T21:54:28Z
last_indexed	2023-09-18T21:54:28Z
_version_	1777413986954772480

Design and fabricate rocket engine

Similar Items