Development of Turret Punch Cutting Tool Using Reverse Engineering Method
This paper presents the reverse engineering technique to develop turret punch cutting tool for Trumatic TC2020R FMC machine. Different shear angle being tested to investigate the cutting process and tool wear. Result shows that 12o cutting tool has the highest tools life with p...
| Main Authors: | , , , , |
|---|---|
| Format: | Conference or Workshop Item |
| Language: | English |
| Published: |
2008
|
| Subjects: | |
| Online Access: | http://umpir.ump.edu.my/id/eprint/1335/ http://umpir.ump.edu.my/id/eprint/1335/1/Development_of_Turret_Punch_Cutting_Tool_Using_Reverse_Engineering_Method.pdf |
| Summary: | This paper presents the reverse engineering technique
to develop turret punch cutting tool for Trumatic TC2020R
FMC machine. Different shear angle being tested to investigate
the cutting process and tool wear. Result shows that 12o
cutting
tool has the highest tools life with poor performance. Cutting
tool with 4.5o
to 6.5o
shear angle obtains lower tool life and
better performance compare with 12o
shear angle. By increasing
the shearing angle, it will reduce the stress on the tool. |
|---|