Analysis and optimization of machining parameters based on different type of thickness in incremental forming process
This research was carried out to develop and analyze the incremental forming machine controlled by a personal computer numerical control (PCNC). The application of this machine is to realize a small production lot with low cost. The process which runs without mould can be used to replace stamping ap...
| id |
ump-1173 |
|---|---|
| recordtype |
eprints |
| spelling |
ump-11732017-04-07T01:46:36Z http://umpir.ump.edu.my/id/eprint/1173/ Analysis and optimization of machining parameters based on different type of thickness in incremental forming process Anuarul Ikhwan, Mat Nazri TS Manufactures This research was carried out to develop and analyze the incremental forming machine controlled by a personal computer numerical control (PCNC). The application of this machine is to realize a small production lot with low cost. The process which runs without mould can be used to replace stamping applications which is very costly due to the mould application. Aim of this study is analysis in tool path for new development of incremental forming. The analyses show the implication and justification for forming process. Using FE analysis is to identify the estimations of the formability and the fracture point of the sheet metal. 2009-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1173/1/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20Table%20of%20content.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/1173/2/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20Abstract.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/1173/3/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20Chapter%201.pdf application/pdf en http://umpir.ump.edu.my/id/eprint/1173/4/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20References.pdf Anuarul Ikhwan, Mat Nazri (2009) Analysis and optimization of machining parameters based on different type of thickness in incremental forming process. Faculty of Mechanical Engineering , Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:45957&theme=UMP2 |
| repository_type |
Digital Repository |
| institution_category |
Local University |
| institution |
Universiti Malaysia Pahang |
| building |
UMP Institutional Repository |
| collection |
Online Access |
| language |
English English English English |
| topic |
TS Manufactures |
| spellingShingle |
TS Manufactures Anuarul Ikhwan, Mat Nazri Analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| description |
This research was carried out to develop and analyze the incremental forming machine controlled by a personal computer numerical control (PCNC). The application of this machine is to realize a small production lot with low cost. The process which runs without mould can be used to replace stamping applications which is very costly due to the mould application. Aim of this study is analysis in tool path for new development of incremental forming. The analyses show the implication and justification for forming process. Using FE analysis is to identify the estimations of the formability and the fracture point of the sheet metal. |
| format |
Undergraduates Project Papers |
| author |
Anuarul Ikhwan, Mat Nazri |
| author_facet |
Anuarul Ikhwan, Mat Nazri |
| author_sort |
Anuarul Ikhwan, Mat Nazri |
| title |
Analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| title_short |
Analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| title_full |
Analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| title_fullStr |
Analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| title_full_unstemmed |
Analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| title_sort |
analysis and optimization of machining parameters based on different type of thickness in incremental forming process |
| publishDate |
2009 |
| url |
http://umpir.ump.edu.my/id/eprint/1173/ http://umpir.ump.edu.my/id/eprint/1173/ http://umpir.ump.edu.my/id/eprint/1173/1/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20Table%20of%20content.pdf http://umpir.ump.edu.my/id/eprint/1173/2/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20Abstract.pdf http://umpir.ump.edu.my/id/eprint/1173/3/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20Chapter%201.pdf http://umpir.ump.edu.my/id/eprint/1173/4/Analysis%20and%20optimization%20of%20machining%20parameters%20based%20on%20different%20type%20of%20thickness%20in%20incremental%20forming%20process%20-%20References.pdf |
| first_indexed |
2023-09-18T21:54:05Z |
| last_indexed |
2023-09-18T21:54:05Z |
| _version_ |
1777413962763075584 |