Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool

This study is focused on the categorical analysis of flank wear mechanisms in end milling of aluminum alloy AA6061 with minimum quantity lubrication (MQL) conditions using nanofluid. Wear mechanisms for the water-based TiO2 nanofluid with a nanoparticle volume fraction of 1.5% are compared with conv...

Full description

Bibliographic Details
Main Authors:	Najiha, M. S., M. M., Rahman, A. R., Yusoff
Format:	Article
Language:	English
Published:	American Society of Mechanical Engineers (ASME) 2015
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/11647/ http://umpir.ump.edu.my/id/eprint/11647/ http://umpir.ump.edu.my/id/eprint/11647/ http://umpir.ump.edu.my/id/eprint/11647/1/fkm-2015-mmrahman-Flank%20Wear%20Characterization.pdf

id	ump-11647
recordtype	eprints
spelling	ump-116472018-10-17T03:31:16Z http://umpir.ump.edu.my/id/eprint/11647/ Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool Najiha, M. S. M. M., Rahman A. R., Yusoff TJ Mechanical engineering and machinery This study is focused on the categorical analysis of flank wear mechanisms in end milling of aluminum alloy AA6061 with minimum quantity lubrication (MQL) conditions using nanofluid. Wear mechanisms for the water-based TiO2 nanofluid with a nanoparticle volume fraction of 1.5% are compared with conventional oil-based MQL (0.48 ml/min and 0.83 ml/min) using an uncoated cemented carbide insert. Micro-abrasion, micro-attrition, and adhesion wear leading to edge chipping are identified as the main wear mechanisms. Aluminum deposits on the tool flank surface are observed. Results show that the water-based nanofluid shows potential as a capable MQL cutting media, in terms of tool wear, replacing the conventional oil-based MQL. American Society of Mechanical Engineers (ASME) 2015-09-09 Article PeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/11647/1/fkm-2015-mmrahman-Flank%20Wear%20Characterization.pdf Najiha, M. S. and M. M., Rahman and A. R., Yusoff (2015) Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool. Journal of Manufacturing Science and Engineering, 137 (6). pp. 1-7. ISSN 1087-1357 (print); 1528-8935 (online) http://dx.doi.org/10.1115/1.4030060 DOI: 10.1115/1.4030060
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Najiha, M. S. M. M., Rahman A. R., Yusoff Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
description	This study is focused on the categorical analysis of flank wear mechanisms in end milling of aluminum alloy AA6061 with minimum quantity lubrication (MQL) conditions using nanofluid. Wear mechanisms for the water-based TiO2 nanofluid with a nanoparticle volume fraction of 1.5% are compared with conventional oil-based MQL (0.48 ml/min and 0.83 ml/min) using an uncoated cemented carbide insert. Micro-abrasion, micro-attrition, and adhesion wear leading to edge chipping are identified as the main wear mechanisms. Aluminum deposits on the tool flank surface are observed. Results show that the water-based nanofluid shows potential as a capable MQL cutting media, in terms of tool wear, replacing the conventional oil-based MQL.
format	Article
author	Najiha, M. S. M. M., Rahman A. R., Yusoff
author_facet	Najiha, M. S. M. M., Rahman A. R., Yusoff
author_sort	Najiha, M. S.
title	Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
title_short	Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
title_full	Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
title_fullStr	Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
title_full_unstemmed	Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool
title_sort	flank wear characterization in aluminum alloy (6061 t6) with nanofluid minimum quantity lubrication environment using an uncoated carbide tool
publisher	American Society of Mechanical Engineers (ASME)
publishDate	2015
url	http://umpir.ump.edu.my/id/eprint/11647/ http://umpir.ump.edu.my/id/eprint/11647/ http://umpir.ump.edu.my/id/eprint/11647/ http://umpir.ump.edu.my/id/eprint/11647/1/fkm-2015-mmrahman-Flank%20Wear%20Characterization.pdf
first_indexed	2023-09-18T22:12:34Z
last_indexed	2023-09-18T22:12:34Z
_version_	1777415125735571456

Flank Wear Characterization in Aluminum Alloy (6061 T6) With Nanofluid Minimum Quantity Lubrication Environment Using an Uncoated Carbide Tool

Similar Items