Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis

This thesis was about simulation analysis on 4 stroke single cylinder engine by 1-Dimensional software. Objective of this thesis is to investigate the effect of NOx emission when hydrogen addition is added to the engine and relation between hydrogen addition and cylinder temperatures. Through these...

Full description

Bibliographic Details
Main Author:	Mohd Aswad, Abd Wahab
Format:	Undergraduates Project Papers
Language:	English
Published:	2009
Subjects:	TJ Mechanical engineering and machinery
Online Access:	http://umpir.ump.edu.my/id/eprint/1107/ http://umpir.ump.edu.my/id/eprint/1107/ http://umpir.ump.edu.my/id/eprint/1107/4/MOHD%20ASWAD%20BIN%20ABD%20WAHAB%20%28MA06064%29.pdf

id	ump-1107
recordtype	eprints
spelling	ump-11072017-02-28T00:13:12Z http://umpir.ump.edu.my/id/eprint/1107/ Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis Mohd Aswad, Abd Wahab TJ Mechanical engineering and machinery This thesis was about simulation analysis on 4 stroke single cylinder engine by 1-Dimensional software. Objective of this thesis is to investigate the effect of NOx emission when hydrogen addition is added to the engine and relation between hydrogen addition and cylinder temperatures. Through these objectives, result of the project can obtain by using 1-Dimensional analysis software. GT-Power software is 1-Dimensional analysis software used in this project. GT-Power was used to develop a baseline design engine in order to do a simulation for 4 stroke single cylinder engine.Air-fuel ratios for hydrogen-gasoline mixture are calculated to get the stoichiometric for mixture. In this thesis, air-fuel ratio is used as parameters in GT-Power software. Default parameter in the GT-Power software was used as an engine parameter in this thesis. The ratio of hydrogen-gasoline fuel also must be change at SI-inject which is intake valve in GTPower software. With using default parameter from GT-Power software, a baseline design engine can be developed before run the simulations. After finish the simulation, the results are plotted by using Microsoft Excel. There are many result can be obtained by using GT-Power software but for this simulation, result of NOx emission and temperature are to be consider in this project. These 2 analyses were performed at 3 different engine speeds which are 1000 rpm, 3000 rpm and 5000 rpm, and at 10 until 20 air-fuel ratio. The result shown NOx emissions increased with the increase of hydrogen addition due to the raised cylinder temperature. 2009-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1107/4/MOHD%20ASWAD%20BIN%20ABD%20WAHAB%20%28MA06064%29.pdf Mohd Aswad, Abd Wahab (2009) Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis. Faculty of Mechanical Engineering, Universiti Malaysia Pahang . http://iportal.ump.edu.my/lib/item?id=chamo:45842&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TJ Mechanical engineering and machinery
spellingShingle	TJ Mechanical engineering and machinery Mohd Aswad, Abd Wahab Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis
description	This thesis was about simulation analysis on 4 stroke single cylinder engine by 1-Dimensional software. Objective of this thesis is to investigate the effect of NOx emission when hydrogen addition is added to the engine and relation between hydrogen addition and cylinder temperatures. Through these objectives, result of the project can obtain by using 1-Dimensional analysis software. GT-Power software is 1-Dimensional analysis software used in this project. GT-Power was used to develop a baseline design engine in order to do a simulation for 4 stroke single cylinder engine.Air-fuel ratios for hydrogen-gasoline mixture are calculated to get the stoichiometric for mixture. In this thesis, air-fuel ratio is used as parameters in GT-Power software. Default parameter in the GT-Power software was used as an engine parameter in this thesis. The ratio of hydrogen-gasoline fuel also must be change at SI-inject which is intake valve in GTPower software. With using default parameter from GT-Power software, a baseline design engine can be developed before run the simulations. After finish the simulation, the results are plotted by using Microsoft Excel. There are many result can be obtained by using GT-Power software but for this simulation, result of NOx emission and temperature are to be consider in this project. These 2 analyses were performed at 3 different engine speeds which are 1000 rpm, 3000 rpm and 5000 rpm, and at 10 until 20 air-fuel ratio. The result shown NOx emissions increased with the increase of hydrogen addition due to the raised cylinder temperature.
format	Undergraduates Project Papers
author	Mohd Aswad, Abd Wahab
author_facet	Mohd Aswad, Abd Wahab
author_sort	Mohd Aswad, Abd Wahab
title	Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis
title_short	Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis
title_full	Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis
title_fullStr	Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis
title_full_unstemmed	Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis
title_sort	addition of hydrogen to gasoline-fuelled 4 stroke si engine using 1-dimensional analysis
publishDate	2009
url	http://umpir.ump.edu.my/id/eprint/1107/ http://umpir.ump.edu.my/id/eprint/1107/ http://umpir.ump.edu.my/id/eprint/1107/4/MOHD%20ASWAD%20BIN%20ABD%20WAHAB%20%28MA06064%29.pdf
first_indexed	2023-09-18T21:53:58Z
last_indexed	2023-09-18T21:53:58Z
_version_	1777413954591522816

Addition of hydrogen to gasoline-fuelled 4 stroke SI engine using 1-dimensional analysis

Similar Items