Investigation on the shear joints failure with tensile loading for aluminum pins

The use of pin joints is to connect two steel plates together and to support load together or alone. It has been extensively used in civil, mechanical and aircraft structures. Most of the available methods have been developed to estimate the loading capacity using side-edge distance but not the posi...

Full description

Bibliographic Details
Main Author:	Mohd Firdaus, Mohd Zaid
Format:	Undergraduates Project Papers
Language:	English
Published:	2009
Subjects:	TA Engineering (General). Civil engineering (General)
Online Access:	http://umpir.ump.edu.my/id/eprint/1001/ http://umpir.ump.edu.my/id/eprint/1001/ http://umpir.ump.edu.my/id/eprint/1001/1/Mohd_Firdaus_Mohd_Zaid.pdf

id	ump-1001
recordtype	eprints
spelling	ump-10012015-03-03T07:48:14Z http://umpir.ump.edu.my/id/eprint/1001/ Investigation on the shear joints failure with tensile loading for aluminum pins Mohd Firdaus, Mohd Zaid TA Engineering (General). Civil engineering (General) The use of pin joints is to connect two steel plates together and to support load together or alone. It has been extensively used in civil, mechanical and aircraft structures. Most of the available methods have been developed to estimate the loading capacity using side-edge distance but not the position of the pins using angle. In this paper, a research is developed to recommend the best position of pin group under in tensile loads based on the assumptions of angle and distance from centroid. The investigation is using Aluminum pins as connecter to joint two plates made of steel. The force applied on the side of plate and the Finite Element Analysis (ALGOR) as software to analysis the model. The analysis is use to find the lowest stress from four pins and that the first pins will fail. That means the pin can support lowest load than others pins. From the result, the pin closest to the load applied, not symmetry with other pin or alone and far from centroid axis are faster failed. As conclusion, The more close distance to centroid axis and other pins, to more higher maximum stress or the pin can support high load before it failed. 2009-11 Undergraduates Project Papers NonPeerReviewed application/pdf en http://umpir.ump.edu.my/id/eprint/1001/1/Mohd_Firdaus_Mohd_Zaid.pdf Mohd Firdaus, Mohd Zaid (2009) Investigation on the shear joints failure with tensile loading for aluminum pins. Faculty of Mechanical Engineering, Universiti Malaysia Pahang. http://iportal.ump.edu.my/lib/item?id=chamo:45965&theme=UMP2
repository_type	Digital Repository
institution_category	Local University
institution	Universiti Malaysia Pahang
building	UMP Institutional Repository
collection	Online Access
language	English
topic	TA Engineering (General). Civil engineering (General)
spellingShingle	TA Engineering (General). Civil engineering (General) Mohd Firdaus, Mohd Zaid Investigation on the shear joints failure with tensile loading for aluminum pins
description	The use of pin joints is to connect two steel plates together and to support load together or alone. It has been extensively used in civil, mechanical and aircraft structures. Most of the available methods have been developed to estimate the loading capacity using side-edge distance but not the position of the pins using angle. In this paper, a research is developed to recommend the best position of pin group under in tensile loads based on the assumptions of angle and distance from centroid. The investigation is using Aluminum pins as connecter to joint two plates made of steel. The force applied on the side of plate and the Finite Element Analysis (ALGOR) as software to analysis the model. The analysis is use to find the lowest stress from four pins and that the first pins will fail. That means the pin can support lowest load than others pins. From the result, the pin closest to the load applied, not symmetry with other pin or alone and far from centroid axis are faster failed. As conclusion, The more close distance to centroid axis and other pins, to more higher maximum stress or the pin can support high load before it failed.
format	Undergraduates Project Papers
author	Mohd Firdaus, Mohd Zaid
author_facet	Mohd Firdaus, Mohd Zaid
author_sort	Mohd Firdaus, Mohd Zaid
title	Investigation on the shear joints failure with tensile loading for aluminum pins
title_short	Investigation on the shear joints failure with tensile loading for aluminum pins
title_full	Investigation on the shear joints failure with tensile loading for aluminum pins
title_fullStr	Investigation on the shear joints failure with tensile loading for aluminum pins
title_full_unstemmed	Investigation on the shear joints failure with tensile loading for aluminum pins
title_sort	investigation on the shear joints failure with tensile loading for aluminum pins
publishDate	2009
url	http://umpir.ump.edu.my/id/eprint/1001/ http://umpir.ump.edu.my/id/eprint/1001/ http://umpir.ump.edu.my/id/eprint/1001/1/Mohd_Firdaus_Mohd_Zaid.pdf
first_indexed	2023-09-18T21:53:44Z
last_indexed	2023-09-18T21:53:44Z
_version_	1777413940473495552

Investigation on the shear joints failure with tensile loading for aluminum pins

Similar Items